C50 is fine. And the bias voltage at pin 13 of IC32 is .02V on the dead voice and -.04V on the working voices. --- In PolySix@yahoogroups.com, Andrew Jury <andy@...> wrote: > > Oh dear! Guess you are going to have to make exhaustive comparative checks > between working and the non-working voice to get to the bottom of this one. > It would be interesting at this point to ensure C50 is OK and that the > filter cut off bias voltage at pin 13 of IC32 doesn¹t vary to wildly from > the others.
Message
Re: one voice does not sound when VCA switch is set to EG
2010-02-16 by Alexis V. Rogers