Discussion about the Korg PolySix synthesizer

Hi folks,

This project is still moving forward. It has taken far longer than I
anticipated.

At this point we think we have found all the errors in the initial board
layout. Andy has got his board fully running in a known working P6. I have
one issue left with mine, but at this point it is hard to tell if the error
is on my board or somewhere else in my P6 (which was not working when I
acquired it).

The next steps for us are to verify that Andy's board can be correctly
calibrated, and then to make all the changes to update the Gerber files for
a production run. I'm hopeful we will be able to accomplish this in the next
couple of months and then offer the boards for sale.

Thanks,

Jed

On Mon, Nov 30, 2009 at 11:02 AM, Jim <jbgange@si.rr.com> wrote:

>
>
> HI,
>
> I would be interested in two or three of the pcb's should you make them.
>
> Jim
>
> ----- Original Message -----
> From: Daniel A
> To: PolySix@yahoogroups.com <PolySix%40yahoogroups.com>
> Sent: Monday, November 30, 2009 1:57 PM
> Subject: [PolySix] Re: Update on new run of KLM-367 PCBs
>
> Jed,
>
> I am still interested in buying a few off you. I will be returning to
> Portland in February so if the project is still held up I can see what I can
> do to help or at least buy a beer/coffee ;)
>
> Daniel
>
>


[Non-text portions of this message have been removed]