Discussion about the Korg PolySix synthesizer

HI,

I would be interested in two or three of the pcb's should you make them.

Jim
  ----- Original Message ----- 
  From: Daniel A 
  To: PolySix@yahoogroups.com 
  Sent: Monday, November 30, 2009 1:57 PM
  Subject: [PolySix] Re: Update on new run of KLM-367 PCBs


    
  Jed,

  I am still interested in buying a few off you. I will be returning to Portland in February so if the project is still held up I can see what I can do to help or at least buy a beer/coffee ;)

  Daniel

  --- In PolySix@yahoogroups.com, Jed Jorgensen <jed.jorgensen@...> wrote:
  >
  > Hi all,
  > 
  > We are still working on this. Troubleshooting has taken a lot longer than
  > expected and we're still working out a few bugs. Andy has been fantastic
  > help in figuring out what the problems are. Once we finish that (I hesitate
  > to provide an estimate as to when since I've been so far off up until now)
  > we will get a final count and do a run of the boards.
  > 
  > Given the general level of interest, I'm guessing we're talking about a
  > fairly small production run. Somewhere between 30-50 PCBs total, unless a
  > bunch of people show up wanting one all of a sudden. At that scale, the cost
  > is likely to be a bit higher than I was hoping. We're probably looking at a
  > PCB somewhere in the $30 range, plus shipping.
  > 
  > Best regards,
  > 
  > Jed
  > 
  > 
  > 
  > On Thu, Oct 15, 2009 at 2:55 AM, del_poolp <del_poolp@...> wrote:
  > 
  > >
  > >
  > > Hi,
  > >
  > > You have any news for disponibility and/or price of new runs of KLM-367 PCB
  > > ?
  > >
  > > Thanks,
  > > PooLP
  > >
  > >
  > > --- In PolySix@yahoogroups.com <PolySix%40yahoogroups.com>, "hyperjed"
  > > <jed.jorgensen@> wrote:
  > > >
  > > > Hi all,
  > > >
  > > > A solution is coming. But like all good things, it takes time to be done
  > > right.
  > > >
  > > > Using the Old Crow gifs, and cross checking with the work that Radek has
  > > done, new Gerber files for the PCB have been created.
  > > >
  > > > Andy, myself, and my PCB designer are all checking things and building
  > > out a bill of materials / parts list for this new board.
  > > >
  > > > The board will be a KLM-367a drop-in replacement. It will not have any
  > > updates for midi. Midi is available from other commercial sources. This
  > > board is to get your PolySix up and running.
  > > >
  > > > Once the parts list is complete and we have finished checking the
  > > gerbers, we will make some prototypes of this new board for testing
  > > purposes.
  > > >
  > > > Assuming testing goes well, we will put out a call for all those who want
  > > to buy one or more PCBs. There may also be an option for complete and tested
  > > boards. (This is still under discussion.)
  > > >
  > > > In the meantime, please try to be patient and we work through this
  > > process.
  > > >
  > > > I will try to post updates as we move along so folks know where things
  > > are at.
  > > >
  > > > All the best,
  > > >
  > > > Jed Jorgensen
  > > >
  > >
  > > 
  > >
  > 
  > 
  > [Non-text portions of this message have been removed]
  >



  


------------------------------------------------------------------------------



  No virus found in this incoming message.
  Checked by AVG - www.avg.com 
  Version: 9.0.709 / Virus Database: 270.14.87/2536 - Release Date: 11/30/09 02:31:00


[Non-text portions of this message have been removed]