Discussion about the Korg PolySix synthesizer

It will be worth the wait :)


--- In PolySix@yahoogroups.com, Jed Jorgensen <jed.jorgensen@...> wrote:
>
> Hi all,
> 
> We are still working on this. Troubleshooting has taken a lot longer than
> expected and we're still working out a few bugs. Andy has been fantastic
> help in figuring out what the problems are. Once we finish that (I hesitate
> to provide an estimate as to when since I've been so far off up until now)
> we will get a final count and do a run of the boards.
> 
> Given the general level of interest, I'm guessing we're talking about a
> fairly small production run. Somewhere between 30-50 PCBs total, unless a
> bunch of people show up wanting one all of a sudden. At that scale, the cost
> is likely to be a bit higher than I was hoping. We're probably looking at a
> PCB somewhere in the $30 range, plus shipping.
> 
> Best regards,
> 
> Jed
> 
> 
> 
> On Thu, Oct 15, 2009 at 2:55 AM, del_poolp <del_poolp@...> wrote:
> 
> >
> >
> > Hi,
> >
> > You have any news for disponibility and/or price of new runs of KLM-367 PCB
> > ?
> >
> > Thanks,
> > PooLP
> >
> >
> > --- In PolySix@yahoogroups.com <PolySix%40yahoogroups.com>, "hyperjed"
> > <jed.jorgensen@> wrote:
> > >
> > > Hi all,
> > >
> > > A solution is coming. But like all good things, it takes time to be done
> > right.
> > >
> > > Using the Old Crow gifs, and cross checking with the work that Radek has
> > done, new Gerber files for the PCB have been created.
> > >
> > > Andy, myself, and my PCB designer are all checking things and building
> > out a bill of materials / parts list for this new board.
> > >
> > > The board will be a KLM-367a drop-in replacement. It will not have any
> > updates for midi. Midi is available from other commercial sources. This
> > board is to get your PolySix up and running.
> > >
> > > Once the parts list is complete and we have finished checking the
> > gerbers, we will make some prototypes of this new board for testing
> > purposes.
> > >
> > > Assuming testing goes well, we will put out a call for all those who want
> > to buy one or more PCBs. There may also be an option for complete and tested
> > boards. (This is still under discussion.)
> > >
> > > In the meantime, please try to be patient and we work through this
> > process.
> > >
> > > I will try to post updates as we move along so folks know where things
> > are at.
> > >
> > > All the best,
> > >
> > > Jed Jorgensen
> > >
> >
> >  
> >
> 
> 
> [Non-text portions of this message have been removed]
>