Discussion about the Korg PolySix synthesizer

Wonderful! Thank you very much. I'll buy some boards when they are  
ready.

skw



On Jun 12, 2009, at 2:05 PM, hyperjed wrote:

> Hi all,
>
> A solution is coming. But like all good things, it takes time to be  
> done right.
>
> Using the Old Crow gifs, and cross checking with the work that Radek  
> has done, new Gerber files for the PCB have been created.
>
> Andy, myself, and my PCB designer are all checking things and  
> building out a bill of materials / parts list for this new board.
>
> The board will be a KLM-367a drop-in replacement. It will not have  
> any updates for midi. Midi is available from other commercial  
> sources. This board is to get your PolySix up and running.
>
> Once the parts list is complete and we have finished checking the  
> gerbers, we will make some prototypes of this new board for testing  
> purposes.
>
> Assuming testing goes well, we will put out a call for all those who  
> want to buy one or more PCBs. There may also be an option for  
> complete and tested boards. (This is still under discussion.)
>
> In the meantime, please try to be patient and we work through this  
> process.
>
> I will try to post updates as we move along so folks know where  
> things are at.
>
> All the best,
>
> Jed Jorgensen
>
>
>
> ------------------------------------
>
> PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6Yahoo!  
> Groups Links
>
>
>