Discussion about the Korg PolySix synthesizer

Count me in!  (I'd like to replace that old eyesore NiCad with a nice, new lithium coin cell, and make that board bulletproof as well!)

THANKS!

Dave Garfield




________________________________
From: Scott K Warren <scott@artbots.com>
To: PolySix@yahoogroups.com
Sent: Wednesday, June 3, 2009 4:38:30 PM
Subject: Re: [PolySix] Feeler: What's the interest level in a run of new KLM-367 PCBs?





I will buy 5 or 10 of these if someone else has already debugged it. 
-- skw

On Jun 2, 2009, at 11:09 PM, hyperjed wrote:

> Hi all,
>
> Since I'm new to the group I probably ought to introduce myself 
> before opening my mouth for other reasons. My name is Jed Jorgensen 
> and I live in Portland, Oregon. I work on renewable energy projects 
> by day and occasionally find some time to solder up audio gear in my 
> basement at night.
>
> I'm thinking pretty hard about picking up where Old Crow left off, 
> copying his work essentially, to make some new, high quality KLM-367 
> PCBs.
>
> My own PolySix is dead in the water without a new PCB (too badly 
> corroded to repair).
>
> This would be an expensive undertaking. It's only feasible for me if 
> it appears that I can at least recoup the schematic capture and 
> layout costs through selling a batch of the PCBs.
>
> If there is sufficient interest, I would to hope to be able to sell 
> the PCBs for somewhere between $10 - $20 USD. It would probably 
> require a run of somewhere between 50-100 PCBs to get to that price 
> point.
>
> Again, this is only a feeler to see if there is enough interest out 
> there, but if you would consider buying one or several, let me know.
>
> Happy oscillating,
>
> Jed
>
>
>
> ------------ --------- --------- ------
>
> PolySix "Digiest" Page: http://www.acc. umu.se/~amber/ Poly6Yahoo! 
> Groups Links
>
>
>





      

[Non-text portions of this message have been removed]