Discussion about the Korg PolySix synthesizer

I've seen similar styles of switch from various manufacturers, though
I've not yet seen one of suitable dimensions. I always keep a lookout,
though.

At some point I will have to do a complete overhaul of my PolySix, which
is pretty much unusable at this point. I'll post to the list if I manage
to find a suitable replacement. I suspect I will end up. I doubt I will
be able to find a drop in replacement though.


On Thu, 2009-05-07 at 14:44 +0100, Andrew Jury wrote:
> Hi,
> 
>  
> 
> This is a very scarce part and I know a lot of people who would like
> supplies of these themselves (I am one of them!). Your only source is
> probably going to be a 'beyond repair' Polysix which is breaking for spares.
> Bare in bind that there are two parts to the switch cap. A coloured top and
> a frame to which it attaches and holds the LED. If the cap has dropped off
> then it is more than likely the frame is damaged too.
> 
>  
> 
> Cheers,
> Andy
> 
>  
> 
> From: PolySix@yahoogroups.com [mailto:PolySix@yahoogroups.com] On Behalf Of
> etejkowski815
> Sent: 07 May 2009 09:43
> To: PolySix@yahoogroups.com
> Subject: [PolySix] Parts
> 
>  
> 
> 
> 
> 
> 
> 
> Does anyone know where I can find a replacement for the POLY button cover on
> my Polysix? I've not had much luck finding one.
> 
> 
> 
> 
> 
> [Non-text portions of this message have been removed]
> 
> 
> 
> ------------------------------------
> 
> PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6Yahoo! Groups Links
> 
> 
>