Discussion about the Korg PolySix synthesizer

Sophie,

 

As I am sure the other members will agree this is probably the right place
to be asking this sort of question! So your arp doesn't work, but the
frequency LED flashes on and off faster and faster as you rotate the know to
the right? The big question is, does the LED illuminate when you press the
orange button? If not then it might just be as simple as a poor contact in
the switch. The top panel switches on the P6 are prone to deterioration over
time so a good, hard (but not over forceful) press down with a wiggling
action might start the circuit running. If the LED comes on but the arp will
not latch when you press a key then you are probably into electronic repair
territory. It sound like the 555 timer is running, but the bus signals might
be missing which are fed from the key assigner. You might want to check the
mass of coloured wires which are soldered directly to the underside of the
top panel board, as they are prone to breaking off.

 

If you are not of a technical disposition I am sure there are plenty of
people (including myself) who would be more than happy to take a look at the
P6 for you. Bear in mind that this keyboard model is coming up for 30 years
old in some cases, so a full service might be required if the thing comes
from unknown sources (i.e. eBay).

 

Let us know how you get on!

 

Thanks,

Andy

 

From: PolySix@yahoogroups.com [mailto:PolySix@yahoogroups.com] On Behalf Of
bangfaceweekend
Sent: 23 April 2009 20:48
To: PolySix@yahoogroups.com
Subject: [PolySix] Arpeggiator

 






Hello polysix lovers!

I'm a newbie, so forgive me if I don't use this discussion group properly at
first.

I made a search in the past messages and couldn't find anything related to
my problem, but I might proove wrong.

I have bought a polysix on ebay and it sounds great!

I can't get the arpeggiator to work, though, even though the LED is blinking
according to the arpeggiation speed.

Any clue, anyone ?

In advance, many thanks for reading this !

Sophie





[Non-text portions of this message have been removed]