Discussion about the Korg PolySix synthesizer

Hi,

 

Which patches are we talking about here? If you mean the factory ones, then
yes, some have it applied depending on the patch selected. If you are saving
your own patch with the MG set to 0 on all three control and when you reload
it some other values are retrieved from memory then there is clearly a
problem. Do you notice a change in speed of the LED when you load a patch?
If you have a volt meter handy then it might be worth measuring the voltage
at IC13 pin 7, IC14 pin 7 and IC19 pin 1. When you set all three MG controls
fully counter-clockwise all voltages should be -5v. Try saving a patch with
these settings. Reload the patch and then see if the voltages vary and by
how much. That should give us some clues as to which settings are varying.

 

Let us know how you get on!

 

Cheers,

Andy

 

 

From: PolySix@yahoogroups.com [mailto:PolySix@yahoogroups.com] On Behalf Of
cicciostoky
Sent: 21 March 2009 10:41
To: PolySix@yahoogroups.com
Subject: [PolySix] Modulation ever ON when a change a Patch...

 

Hello guys, i've a battery saved polysix, now perfect working except a
stupid problem:

Every time i set a Patch, i have the Modulation ON, and if i want to stop
it, everytime i need to set the frequency pot to zero. Also with the pot to
zero, if a change patch, modulation again ON.

Is normal wich every Patch on the Polysix have the modulation ON? or is a
problem of mine...

thanks!





[Non-text portions of this message have been removed]