Discussion about the Korg PolySix synthesizer

Hello Everyone 

   The standard file type for PC board fabs are Called Gerbers. The
gerber file has several layers to it. It will have info for each layer
of copper. It will also have info for top and bottom silkscreens, not
to mention drill patterns. In short, all the Cad,Cam info you might
need. There is no easy way to convert from a jpg of a board to a
gerber that I know of. The gerber file basically allows them to insert
raw copper clad board in one end and out comes finished board on the
other end.That having been said, Let me know when the jpg's are ready.
I need to make one. 


Archie 






--- In PolySix@yahoogroups.com, "Sam Larch" <sdlarch@...> wrote:
>
> I'm on-board! (Pardon the pun) what kind of files do the board manu's
> need? Can anyone suggest one in the US?
> 
> On 10/8/08, radek_tymecki <radek.tymecki@...> wrote:
> > I'll post jpg files so everybody will be able to make own board :)
> >
> > Radek
> >
> >
> > --- In PolySix@yahoogroups.com, "Andrew Jury" <andy@> wrote:
> >>
> >> Hi Radek,
> >>
> >> If you manage to pull this off then that will be a real acheivement.
> >> I too had a look at refrabricating the KLM-367 using the Old Crow's
> >> design, but a small production run would have been prohibitively
> >> expensive! If you arrive at a working model then please put me down
> >> for your first order!
> >>
> >> Cheers,
> >> Andy
> >>
> >> --- In PolySix@yahoogroups.com, "radek_tymecki" <radek.tymecki@>
> >> wrote:
> >> >
> >> > Hi mates !
> >> >
> >> > I'm working on KLM 367 clone board.
> >> >
> >> > Keep Your fingaz crossed :D
> >> >
> >> > Radek
> >> >
> >>
> >
> >
> >
> 
> -- 
> Sent from my mobile device
>