Discussion about the Korg PolySix synthesizer

First check the other setting and make sure there IS a problem witht 
he mod wheel setting. 

If there is, you can try this - take the mod wheel unit out, 
disassamble the problematic wheel, and change the mod pot position in 
idle (wheel is at min position), then get the platic wheel back.
Not sure how it will wrk but you can try...

Also, there might be a trimpot for setting the mod while in idle 
position. Check the schematics...



--- In PolySix@yahoogroups.com, "mondokraftwerk" <mondokraftwerk@...> 
wrote:
>
> Hello Everyone,
> 
> I have a problem with the modulation wheel of my polysix,
> cause if i turn the wheel complete down,this non stop the Vco
> modulation  and I continue to listen a little ammount of it.
> How I can solve this  problem?
> 
> Thanks
> 
> Giorgio
>