Discussion about the Korg PolySix synthesizer

I found the issue.  I reseated the IC that was replaced during the 
battery procedure. (put it in a socket instead of directly on the 
board)


--- In PolySix@yahoogroups.com, "sdlarch1" <sdlarch@...> wrote:
>
> 
> According to the calibration manual, the waveform at CN03-5 should 
look
> like this:
> 
>   [Click for a larger image. Opens in a new window] 
> <http://01eea9c.netsolhost.com/poly6/cal_snipet_large.jpg>
> 
> Mine looks like this:
> 
>   [Click for a larger image. Opens in a new window] 
> <http://01eea9c.netsolhost.com/poly6/cn03-5_read_large.jpg>
> 
> The controls are set like this:
> 
>   [Click for a larger image. Opens in a new window] 
> <http://01eea9c.netsolhost.com/poly6/vca_adjust_presets_large.jpg>
> 
> Does anyone see something blatantly wrong? Any ideas? I've 
performed the
> battery swap. I went throught the cal procedure after the battery
> operation and this waveform looked fine. The only other mod I've 
done is
> that PC1 was replaced with a VTL5C3 and R93 was changed to a 1k2 
ohm.
> -Sam
> 
> 
> 
> [Non-text portions of this message have been removed]
>