Discussion about the Korg PolySix synthesizer

Hi yes it seems that your spot on!! It is infact 1 dodgy ssmt 2056
 chip and could there be possibly one ssmt 2044 above as it seems the
working chip even swapped for the bad still is a bit muffled on that
unit!! once i started removing the chips (ssmt 2056) the problem did
follow!! Now I'm
really desperate do you know where i could get the said chips from!??!
Many thanks for your help i would have been totally stuck without your
help!!

--- In PolySix@yahoogroups.com, "Chromatest J. Pantsmaker"
<chromatest@...> wrote:
>
> I think those chips are all socketed, so you could ***CAREFULLY***
> swap the chips around and see if the problem follows.  When you open
> the case, you can tell which voice is sounding by the LED.  Find out
> which one is bad, then swap it with another.. One chip at a time.
> 
> Make sure the system is turned off for a couple minutes before you
> pull or insert a chip.  The chips used are not easy to get, but
> possible.
> 
> On 5/25/07, blacknred123 <blacknred123@...> wrote:
> > Hi firstly thanks for your reply secondly do you think its easily
> > sorted i.e. is there much chance of me picking up an EG chip for
> > replacement assuming that is the problem!?!?
> >
> >
> >
> > --- In PolySix@yahoogroups.com, klosmon <klosmon@> wrote:
> > >
> > > First impression is that one of the envelope generators is not
> > working.
> > > Possibly the EG chip itself;  possibly the support circuit.
> > >
> > > ~G
> > >
> > > At 06:49 AM 5/25/2007, you wrote:
> > >
> > > >Hi all I just recieved my polysix aware that it had a problem it
> > seems
> > > >that every 6th note i play no mater where it is on there board it
> > cuts
> > > >out, But only in poly mode. The key does not sound when i have the
> > > >switch set to eg on the VCA but when switched to wave on the vca
> > the
> > > >sixth note whatever it may be is muffled. Does anyone have any
> > > >ideas!?! Bearing in mind that the batt has never been changed i
> > > >wodered if this may have something to do with it though all buttons
> > > >lights etc work as they should!??!......will be changing batt this
> > week!
> > > >
> > > >
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> >
> >
> >
> >
> > PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
> > Yahoo! Groups Links
> >
> >
> >
> >
> 
> 
> -- 
> .sig
> -Chromatest J. Pantsmaker
> http://www.chromatest.net
>