Discussion about the Korg PolySix synthesizer

Well, one obvious thing you might have overlooked --

removing the battery wipes the program memory;  if you don't program in (or 
reload) patches, you'll get random (or no) sound.  Try putting the front 
panel into "Manual" mode & see if you can get the controls to respond.

If this doesn't work, go back & check to be sure you replaced ALL the 
inter-board connectors.

~G

At 05:45 PM 10/12/2006, you wrote:

>Hello,
>
>Tonight I attempted to change the battery in my korg polysix. I
>followed the directions on the Resonant Frequency site
>(<http://www.hoohahrecords.com/resfreq/mods/polysix/battery.html>http://www.hoohahrecords.com/resfreq/mods/polysix/battery.html), 
>and
>now when I turn on the synth, no sound comes out. All i hear is a bit
>of weird static.
>
>The only thing I can find which I did differently from the directions,
>was that I bought a battery with a PCB mount attatched to it, and I
>sodered this in before I installed the diode. I hardly see how this
>could make a difference...
>
>If anyone can offer me any advice, it would be MOST appreciated.
>
>Thanks,
>
>- Peter
>
>


[Non-text portions of this message have been removed]