You know, I got those backwards. The low end is flat and the high end is sharp. On 4/25/06, Sam Larch <sdlarch@gmail.com> wrote: > > You mean VR 10 instead of 12, right? > > It's like I don't have enough throw in the pots. The most logical > approach I see is that I would center all VRs 1, 3, 10, 11, & 15 - and then > use vr15 to center C3. With these settings, C1 is way (+200 cents) sharp, > and C6 is way (-200 cents) flat. I can't swing tune high and low far enough > apart to get the complete range in tune. > > What damage could be caused by adding resistance to the pots (high and > low) to get more swing out of them? > > > On 4/24/06, gil_we <gil_we@yahoo.com> wrote: > > > > --- In PolySix@yahoogroups.com, "sdlarch1" <sdlarch@...> wrote: > > > > > > I am having a terrible time tuning my PolySix. I can get all 6 banks > > > in tune with each other no problem. > > > > > > I cannot get C0, C3, and C6 in tune at the same time. To keep > > > consistency, I checked each C on the same bank. > > > > > > I've been through the calib procedure to no avail. > > > > > > Can someone guide me to a potential point of failure? > > > > > > > > > Try to get only the first oscillator in tune first. > > GENTLY take all SSM's out except of the first oscillator,a > > and press the Unison key. Now you can hear sound with every note you > > play. > > > > Use VR11, VR12, VR1, VR3, VR15 to get the scale perfect. > > This is a lot of trial and error. Start with positioning them all to > > the center. Use VR15 from time to time to correct to the right pitch of > > A440 for example. > > > > Let me know how it works. > > > > > > > > > > > > PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6 > > > > > > ------------------------------ > > YAHOO! GROUPS LINKS > > > > > > - Visit your group "PolySix<http://groups.yahoo.com/group/PolySix>" > > on the web. > > > > - To unsubscribe from this group, send an email to: > > PolySix-unsubscribe@yahoogroups.com > > <PolySix-unsubscribe@yahoogroups.com?subject=Unsubscribe> > > > > - Your use of Yahoo! Groups is subject to the Yahoo! Terms of > > Service <http://docs.yahoo.com/info/terms/>. > > > > > > ------------------------------ > > > > [Non-text portions of this message have been removed]
Message
Re: [PolySix] Re: Tuning
2006-04-26 by Sam Larch
Attachments
- No local attachments were found for this message.