Discussion about the Korg PolySix synthesizer

I used made both Trident and P6 retrofits and they both work very 
well.

--- In PolySix@yahoogroups.com, "jure zitnik" <kokoon@...> wrote:
>
> i don't know about the trident but on polysix you have 2 pots for
> filter tuning (you're actutally tuning cutoff, not resonance):
> one for VCF offset
> one for VCF scale
> 
> however, expect that the tracking will be way worse than VCO's
> tracking. maybe 3 usable octaves.
> 
> jure
> 
> On 4/20/06, Niels Ott <niels.ott@...> wrote:
> > Hello everybody,
> >
> > I recently got my SSM 2044 chips and installed them into my 
Trident MK2.
> > I managed to tune the VCF resonance using VRx01 - 03 on board KLM-
378B.
> >
> > My problem is that the tuning only stays consistent for the middle
> > octave, lower notes and especially higher ones are detuned.
> >
> > This might be a problem with the adjustment of keyboard tracking. 
Does
> > anybody know how to adjust that?
> >
> > Thanks for your time.
> >
> >    Niels
> >
> >
> > PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
>