i think everything can be replaced. i've replaced quite a few ICs in mine (it still doesn't work 100% though). the traces are repairable (you just jumper them) but the tricky part is to find the faulty ones. there's a nice guide on this on oldcrow's site. i'm not saying it's that for sure though - and it's more difficult to locate the broken traces if it's already been half-repaired (you don't see where the battery acid leaked)... jure On 3/21/06, pplasticeyess <dangiant@telus.net> wrote: > I know the site. I'll give it a try. > I'll have to find an oscilloscope somehow, I guess. > If it is from the battery damage, is it usually repairable? > I know some of the ICs in these things are hard to replace... > > > --- In PolySix@yahoogroups.com, "jure zitnik" <kokoon@...> wrote: > > > > well what you're describing could easily be from the battery damage. > > > > maybe "tuning to itself" could mean calibrate it. you can find the > > instructions to calibration procedure on oldcrow's site. it could help > > doing that. > > > > jure > > > > On 3/21/06, pplasticeyess <dangiant@...> wrote: > > > I'm sorry, I'm not sure I know what tuning it to itself means. > > > Could you explain a little further for me? Thanks... > > > > > > --- In PolySix@yahoogroups.com, "kevin hogarth" <kevin.hogarth@> wrote: > > > > > > > > Tuning the instrument to itself > > > > > > > > On 3/20/06, pplasticeyess <dangiant@> wrote: > > > > > > > > > > Yep. I bought it used and it looks like it had the battery leak problem > > > > > and someone fixed it > > > > > up very nicely... > > > > > If you know of common problems that occur after the battery leak that are > > > > > related to mine, > > > > > it might help. > > > > > thanks. > > > > > > > > > > > > > > > > > > > > --- In PolySix@yahoogroups.com, "jure zitnik" <kokoon@> wrote: > > > > > > > > > > > > did you check for battery leak damage? > > > > > > > > > > > > On 3/19/06, Daniel Giantomaso <dangiant@> wrote: > > > > > > > Hi everyone, > > > > > > > > > > > > > > I just joined this forum because I have a Polysix that is about an > > > > > inch away > > > > > > > from working perfectly. > > > > > > > I love the sound of this synth and I would love to have it working > > > > > > > perfectly. > > > > > > > I was hoping someone on here might be familiar with the problems I'm > > > > > having: > > > > > > > > > > > > > > 1. The effects work (kick in and change when I operate the MODE > > > > > switch), but > > > > > > > the speed/intensity knob has no effect. I tested the pot and it is > > > > > fine. I > > > > > > > know the 368 board is the effects board, but I have no idea where to > > > > > find > > > > > > > the components that are to do with the speed control... Maybe It's > > > > > simply a > > > > > > > cable problem? > > > > > > > > > > > > > > 2. The MG works, but I cannot alter the frequency. When I turn up the > > > > > level > > > > > > > it just slightly opens the filter, or increases the volume or > > > > > increases the > > > > > > > pitch, depending what I have it switched to modulate, but it does not > > > > > sweep. > > > > > > > The delay works fine. > > > > > > > > > > > > > > I have a feeling that these problems are related in some way, since > > > > > they > > > > > > > both involve a modulating frequency control... > > > > > > > > > > > > > > Anyways, thanks in advance to anyone who might be able to help. > > > > > > > > > > > > > > -Daniel > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6 > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6 > > > > > > > > > > > > > > > > > > > > SPONSORED LINKS > > > > > Electronic instrument<http://groups.yahoo.com/gads?t=ms&k=Electronic > > > +instrument&w1=Electronic+instrument&w2=Synthesizer+music&w3=Electronic > > > +music&w4=Music+sampler&w5=Electronic+musical > > > +instrument&c=5&s=126&.sig=j3TK8h6GNpD5AMFN0TJA3A> Synthesizer > > > > > music<http://groups.yahoo.com/gads?t=ms&k=Synthesizer > +music&w1=Electronic > > > +instrument&w2=Synthesizer+music&w3=Electronic+music&w4=Music > > > +sampler&w5=Electronic+musical > > > +instrument&c=5&s=126&.sig=tmTLRMUurlUEhehue_lx3A> Electronic > > > > > music<http://groups.yahoo.com/gads?t=ms&k=Electronic > +music&w1=Electronic > > > +instrument&w2=Synthesizer+music&w3=Electronic+music&w4=Music > > > +sampler&w5=Electronic+musical > > > +instrument&c=5&s=126&.sig=PkktJzelnl06zWnwP49VaA> Music > > > > > sampler<http://groups.yahoo.com/gads?t=ms&k=Music > +sampler&w1=Electronic > > > +instrument&w2=Synthesizer+music&w3=Electronic+music&w4=Music > > > +sampler&w5=Electronic+musical > > > +instrument&c=5&s=126&.sig=gWsxSSKEGxZQckBqBLtSXg> Electronic > > > > > musical instrument<http://groups.yahoo.com/gads?t=ms&k=Electronic+musical > > > +instrument&w1=Electronic+instrument&w2=Synthesizer+music&w3=Electronic > > > +music&w4=Music+sampler&w5=Electronic+musical > > > +instrument&c=5&s=126&.sig=0ggbCcIf2B7r1P8g9cEGtw> > > > > > ------------------------------ > > > > > YAHOO! GROUPS LINKS > > > > > > > > > > > > > > > - Visit your group "PolySix <http://groups.yahoo.com/group/PolySix>" > > > > > on the web. > > > > > > > > > > - To unsubscribe from this group, send an email to: > > > > > PolySix-unsubscribe@yahoogroups.com<PolySix- > unsubscribe@yahoogroups.com? > > > subject=Unsubscribe> > > > > > > > > > > - Your use of Yahoo! Groups is subject to the Yahoo! Terms of > > > > > Service <http://docs.yahoo.com/info/terms/>. > > > > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > > > > > > > > > PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6 > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6 > Yahoo! Groups Links > > > > > > >
Message
Re: [PolySix] Re: New here. Need help repairing effects on Polysix.
2006-03-21 by jure zitnik
Attachments
- No local attachments were found for this message.
