Discussion about the Korg PolySix synthesizer group photo

Yahoo Groups archive

Discussion about the Korg PolySix synthesizer

Index last updated: 2026-04-28 23:40 UTC

Message

Re: [PolySix] Back To One Again - Battery myths

2006-01-03 by klosmon

No.
A number of people have attributed many PolySix malfuctions to a bad battery;
the ONLY thing the battery does (besides leak all over the board & cause 
untold damage) is to maintain power to the RAM chip when the synth is 
turned off.
The RAM will still work, if the battery is dead or missing;  you can save 
programs from the front panel or from the tape interface & recall them at 
will -- as long as you don't turn off the synth.

It's been my experience that when people think they've corrected all the 
circuit board problems caused by a battery leak, they're ususally wrong -- 
keep in mind this is a digitally controlled machine, and that data and 
address lines are running all over the CPU & front panel boards.  If ANY of 
these lines are shorted, broken or otherwise screwed with by a leaking 
battery, the synth will malfunction -- sometimes in surprising ways.

(let me also add that visual inspection is not enough to determine that 
battery damage has been repaired;  there are many traces running under ICs 
that can be etched away without being visible).

~G

At 09:12 AM 1/3/2006, you wrote:
>I just found out that the New battery that was installed is a slightly
>lower voltage, a 2032 lithium
>
>It should be 3.2 Volts? Correct?
>
>I messed with the Reset Adjuster to no avail. The main problem was the
>sound reverting back to Bank One , Sound A every 20 minutes or so.
>Would a lower voltage battery be causing the problem?
>
>Thanks
>Joe
>
>
>
>
>
>PolySix "Digiest" Page: 
><http://www.acc.umu.se/~amber/Poly6>http://www.acc.umu.se/~amber/Poly6
>
>
>
>SPONSORED LINKS
><http://groups.yahoo.com/gads?t=ms&k=Electronic+instrument&w1=Electronic+instrument&w2=Synthesizer+music&w3=Electronic+music&w4=Music+sampler&w5=Electronic+musical+instrument&w6=Electronic+instrument+cases&c=6&s=159&.sig=ci3KdjeGEOOzOvNHaWGxmQ>Electronic 
>instrument 
><http://groups.yahoo.com/gads?t=ms&k=Synthesizer+music&w1=Electronic+instrument&w2=Synthesizer+music&w3=Electronic+music&w4=Music+sampler&w5=Electronic+musical+instrument&w6=Electronic+instrument+cases&c=6&s=159&.sig=QZq091SziMTvPtOVeLgMTw>Synthesizer 
>music 
><http://groups.yahoo.com/gads?t=ms&k=Electronic+music&w1=Electronic+instrument&w2=Synthesizer+music&w3=Electronic+music&w4=Music+sampler&w5=Electronic+musical+instrument&w6=Electronic+instrument+cases&c=6&s=159&.sig=gS9LoWt8tZBE5FT38B1aTg>Electronic 
>music
><http://groups.yahoo.com/gads?t=ms&k=Music+sampler&w1=Electronic+instrument&w2=Synthesizer+music&w3=Electronic+music&w4=Music+sampler&w5=Electronic+musical+instrument&w6=Electronic+instrument+cases&c=6&s=159&.sig=wsU5612joclWK2F6-IGWbQ>Music 
>sampler 
><http://groups.yahoo.com/gads?t=ms&k=Electronic+musical+instrument&w1=Electronic+instrument&w2=Synthesizer+music&w3=Electronic+music&w4=Music+sampler&w5=Electronic+musical+instrument&w6=Electronic+instrument+cases&c=6&s=159&.sig=HX3mWNhkkPvOuArbezM6eg>Electronic 
>musical instrument 
><http://groups.yahoo.com/gads?t=ms&k=Electronic+instrument+cases&w1=Electronic+instrument&w2=Synthesizer+music&w3=Electronic+music&w4=Music+sampler&w5=Electronic+musical+instrument&w6=Electronic+instrument+cases&c=6&s=159&.sig=aO9wB8aR9ymHLqP9yFznAQ>Electronic 
>instrument cases
>
>
>----------
>YAHOO! GROUPS LINKS
>
>    *  Visit your group "<http://groups.yahoo.com/group/PolySix>PolySix" 
> on the web.
>    *
>    *  To unsubscribe from this group, send an email to:
>    * 
> <mailto:PolySix-unsubscribe@yahoogroups.com?subject=Unsubscribe>PolySix-unsubscribe@yahoogroups.com 
>
>    *
>    *  Your use of Yahoo! Groups is subject to the 
> <http://docs.yahoo.com/info/terms/>Yahoo! Terms of Service.
>
>
>----------


[Non-text portions of this message have been removed]

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.