Discussion about the Korg PolySix synthesizer

A thousand thankyous , I'll let you know how it turns out.
 
Cheers
joe 
 
-----Original Message-----
From: The Old Crow <oldcrow@oldcrows.net>
To: PolySix@yahoogroups.com
Sent: Fri, 23 Dec 2005 00:10:19 -0500
Subject: Re: [PolySix] Back to One


  That sounds like the KLM-367 is resetting.  Might want to adjust the 
reset trimmer a little.  The A-D, 1-8 LEDs (and other LEDs) should all 
light up for about 1 second before setting to patch A-1.
If it sets to A1 too quickly, then the reset voltage adjustment is a bit 
too 'edgy'.

Crow
/**/

motionsandwaves wrote:

>I just recently had the battery replaced in my Polysix and had 
>everything cleaned inside and out, the problem is that say if I'm one 
>Bank C sound 2, after 15-20 minutes the sound reverts back to Bank A 
>Sound 1.  What do I do?
>
>Any help would be super groovey
>
>Thanks
>Joe
>  
>




PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6 
Yahoo! Groups Links



 


[Non-text portions of this message have been removed]