Discussion about the Korg PolySix synthesizer

Hello,
Still no sound, every chip has his power, setup from tape seems to 
work correctly (bank 1..8 lit up) so I think the problem is somewher 
on KLM366 (new prod). No gate signal on pin 15 ic5, also no 0..3,5 v 
on pin 1 ic9 so what can I do......?
--- In PolySix@yahoogroups.com, "FRANK SPANO" <fspa8724@m...> wrote:
>
> Thanks, I'll try that
> 
> 
> >From: "lnz2166" <lnz2166@y...>
> >Reply-To: PolySix@yahoogroups.com
> >To: PolySix@yahoogroups.com
> >Subject: [PolySix] Re: Polysix no sound
> >Date: Tue, 06 Dec 2005 06:59:25 -0000
> >
> >
> >
> >
> >
> >This might sound trivial but is your power supply output all in
> >
> >check. In addition have you checked the the solder pads on the 
power
> >
> >connectors. I had and issue with one poly6 where the 15v solder 
pad
> >
> >on the connector was lifted. Also do a sanity check and make sure 
you
> >
> >chips are all getting proper voltages. Check old crows site for a
> >
> >scanned service manual.
> >
> >
> >
> >http://www.oldcrows.net/
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >--- In PolySix@yahoogroups.com, "FRANK SPANO" <fspa8724@m...> 
wrote:
> >
> > >
> >
> > > I have a similar problem. Does anyone have a scanned service 
manual
> >
> >I can
> >
> > > get emailed? Greatly appreciated
> >
> > >
> >
> > >
> >
> > > >From: "gil_we" <gil_we@y...>
> >
> > > >Reply-To: PolySix@yahoogroups.com
> >
> > > >To: PolySix@yahoogroups.com
> >
> > > >Subject: [PolySix] Re: Polysix no sound
> >
> > > >Date: Mon, 05 Dec 2005 08:56:38 -0000
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >I think the service manual have this information...
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >--- In PolySix@yahoogroups.com, "hansomchaam" 
<hansomchaam@y...>
> >
> > > >
> >
> > > >wrote:
> >
> > > >
> >
> > > > >
> >
> > > >
> >
> > > > > Thanks for reply, I fixed the battery problem as described.
> >
> > > >
> >
> > > > > I checked (again) all connections/signals with an 
oscilloscoop.
> >
> > > >
> >
> > > > > I don't see any output, also no gate signals when key-
stroke on
> >
> >ic5
> >
> > > >
> >
> > > > > KLM-366.
> >
> > > >
> >
> > > > > What shape must be on TP2 KLM367?
> >
> > > >
> >
> > > > > Thanks for your help.
> >
> > > >
> >
> > > > > Han
> >
> > > >
> >
> > > > > --- In PolySix@yahoogroups.com, "gil_we" <gil_we@y...> 
wrote:
> >
> > > >
> >
> > > > > >
> >
> > > >
> >
> > > > > > How are the main voltages ? Has the battery leaked ?
> >
> > > >
> >
> > > > > >
> >
> > > >
> >
> > > > > >
> >
> > > >
> >
> > > > > > --- In PolySix@yahoogroups.com, "hansomchaam"
> >
> ><hansomchaam@y...>
> >
> > > >
> >
> > > > > > wrote:
> >
> > > >
> >
> > > > > > >
> >
> > > >
> >
> > > > > > > Hello,
> >
> > > >
> >
> > > > > > > Again here is a polysix with the "no sound at all" 
problem.
> >
> > > >
> >
> > > > > > > When I measure with oscilloscoop on KLM366 (new) ic 9 
pin 1
> >
> > > >
> >
> > > > > there
> >
> > > >
> >
> > > > > > is a
> >
> > > >
> >
> > > > > > > constant pattern but not a 0.5 V/oct. Keystrokes has no
> >
> >effect
> >
> > > >
> >
> > > > > at
> >
> > > >
> >
> > > > > > all,
> >
> > > >
> >
> > > > > > > processor 8049 gives signals on DB0..DB8. Also no 
output on
> >
> > > >
> >
> > > >gate
> >
> > > >
> >
> > > > > > 0...3
> >
> > > >
> >
> > > > > > > = pin 15,10,7,2 ic 5 on keystroke.
> >
> > > >
> >
> > > > > > > Does anyone has suggestions.
> >
> > > >
> >
> > > > > > > Please help me, I look forward to hear the nice sound 
again.
> >
> > > >
> >
> > > > > > > Thans,
> >
> > > >
> >
> > > > > > > Han.
> >
> > > >
> >
> > > > > > >
> >
> > > >
> >
> > > > > >
> >
> > > >
> >
> > > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >   YAHOO! GROUPS LINKS
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >    Visit your group "PolySix" on the web.
> >
> > > > 
> >
> > > >    To unsubscribe from this group, send an email to:
> >
> > > > PolySix-unsubscribe@yahoogroups.com
> >
> > > > 
> >
> > > >    Your use of Yahoo! Groups is subject to the Yahoo! Terms 
of
> >
> >Service.
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > >
> >
> > > 
_________________________________________________________________
> >
> > > FREE pop-up blocking with the new MSN Toolbar – get it now!
> >
> > > http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/
> >
> > >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >   YAHOO! GROUPS LINKS
> >
> >
> >
> >
> >    Visit your group "PolySix" on the web.
> > 
> >    To unsubscribe from this group, send an email to:
> > PolySix-unsubscribe@yahoogroups.com
> > 
> >    Your use of Yahoo! Groups is subject to the Yahoo! Terms of 
Service.
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> 
> _________________________________________________________________
> Is your PC infected? Get a FREE online computer virus scan from 
McAfee® 
> Security. http://clinic.mcafee.com/clinic/ibuy/campaign.asp?
cid=3963
>