Discussion about the Korg PolySix synthesizer group photo

Yahoo Groups archive

Discussion about the Korg PolySix synthesizer

Index last updated: 2026-04-14 00:08 UTC

Message

Re: Polysix no sound

2005-12-06 by lnz2166

This might sound trivial but is your power supply output all in 
check. In addition have you checked the the solder pads on the power 
connectors. I had and issue with one poly6 where the 15v solder pad 
on the connector was lifted. Also do a sanity check and make sure you 
chips are all getting proper voltages. Check old crows site for a 
scanned service manual.

http://www.oldcrows.net/







--- In PolySix@yahoogroups.com, "FRANK SPANO" <fspa8724@m...> wrote:
>
> I have a similar problem. Does anyone have a scanned service manual 
I can 
> get emailed? Greatly appreciated
> 
> 
> >From: "gil_we" <gil_we@y...>
> >Reply-To: PolySix@yahoogroups.com
> >To: PolySix@yahoogroups.com
> >Subject: [PolySix] Re: Polysix no sound
> >Date: Mon, 05 Dec 2005 08:56:38 -0000
> >
> >
> >
> >
> >
> >I think the service manual have this information...
> >
> >
> >
> >--- In PolySix@yahoogroups.com, "hansomchaam" <hansomchaam@y...>
> >
> >wrote:
> >
> > >
> >
> > > Thanks for reply, I fixed the battery problem as described.
> >
> > > I checked (again) all connections/signals with an oscilloscoop.
> >
> > > I don't see any output, also no gate signals when key-stroke on 
ic5
> >
> > > KLM-366.
> >
> > > What shape must be on TP2 KLM367?
> >
> > > Thanks for your help.
> >
> > > Han
> >
> > > --- In PolySix@yahoogroups.com, "gil_we" <gil_we@y...> wrote:
> >
> > > >
> >
> > > > How are the main voltages ? Has the battery leaked ?
> >
> > > >
> >
> > > >
> >
> > > > --- In PolySix@yahoogroups.com, "hansomchaam" 
<hansomchaam@y...>
> >
> > > > wrote:
> >
> > > > >
> >
> > > > > Hello,
> >
> > > > > Again here is a polysix with the "no sound at all" problem.
> >
> > > > > When I measure with oscilloscoop on KLM366 (new) ic 9 pin 1
> >
> > > there
> >
> > > > is a
> >
> > > > > constant pattern but not a 0.5 V/oct. Keystrokes has no 
effect
> >
> > > at
> >
> > > > all,
> >
> > > > > processor 8049 gives signals on DB0..DB8. Also no output on
> >
> >gate
> >
> > > > 0...3
> >
> > > > > = pin 15,10,7,2 ic 5 on keystroke.
> >
> > > > > Does anyone has suggestions.
> >
> > > > > Please help me, I look forward to hear the nice sound again.
> >
> > > > > Thans,
> >
> > > > > Han.
> >
> > > > >
> >
> > > >
> >
> > >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >   YAHOO! GROUPS LINKS
> >
> >
> >
> >
> >    Visit your group "PolySix" on the web.
> > 
> >    To unsubscribe from this group, send an email to:
> > PolySix-unsubscribe@yahoogroups.com
> > 
> >    Your use of Yahoo! Groups is subject to the Yahoo! Terms of 
Service.
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> 
> _________________________________________________________________
> FREE pop-up blocking with the new MSN Toolbar – get it now! 
> http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/
>

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.