Discussion about the Korg PolySix synthesizer

SW1 turns off all of the filters I believe... so that way you're only hearing the VCOs..


----- Original Message -----
From: "Benjamin Wild" <wildjamin@gmx.de>
To: PolySix@yahoogroups.com
Subject: Re: [PolySix] can somebody comment on the procedur to calibrate a polysix
Date: Sat, 5 Nov 2005 10:03:36 +0100

> 
> hello Johannes,
> thanks for replying.. I didn't mark my problems, so you just did a
> general comment..
> 
> I'm used to tuning a ms20 via a mcv1, so I know the basic problematic..
> but as there seems to be not introduction in how the system works -
> the manual is very cryptic to me.
> 
> what's the thing with SW1 ?
> 
>   > 4.7.1 Change circuit board  slide switch (SW1) to opposite position
>   > (away from VR1).
> 
> maybe if I'd just follow each step, it will become clear - but most
> times something 'obvious' is missing..
> 
> 
> benjamin wild
> 
> 
> 
> PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
> Yahoo! Groups Links
> 
> 
> 
> 



.sig
-Chromatest J. Pantsmaker
http://www.chromatest.net