Discussion about the Korg PolySix synthesizer group photo

Yahoo Groups archive

Discussion about the Korg PolySix synthesizer

Index last updated: 2026-04-28 23:40 UTC

Message

Re: AW: [PolySix] Key Rubbers

2005-10-17 by Antti

I had a few key rubbers missing from my Polysix. I had
a broken tv lying around and I took apart the remote
control and found somewhat similar rubber pads there
and fitted them on my Polysix. So far so good, works
like a charm... :)


--- Andrew Mees <andrewmees@hotmail.com> wrote:


---------------------------------
Hi,
Thanks for the reply.
I have already had them cleaned but the technician
said a couple of 
them are on there way out.  I assume this would be a
common problem in 
a few years as mine is in fairly good condition.  I
have been told by 
some people that other korg key rubbers will fit but
others have told 
me that they wont.  They are all ok for now but I
imagine soon I might 
have some keys that wont work :-(
I guess the only solution would be to get the midi kit
and control the 
polysix externally.
Cheers,
Meezy


On 13/10/2005, at 5:39 PM, olgu@tiscali.de wrote:

> Hi,
>
> I don't know.
>
> But have you already tried to clean them ?
>
> You should use pure alcohol for the copper/gold
contacts. If there are 
> still
> markings on the gold after that, you can use a
rubber (which you 
> normaly
> use to remove pencil strokes from paper) to clean
the surface 
> mechanically.
>
> The black pads on the rubber seem to be not too
problematic (I've 
> cleaned
> many keypads so far on different devices, but not on
the P6 so 
> far....).
> I usually demount them and clean them with water and
a soft brush.
> I'm always afraid that the small black parts get
loose during 
> cleaning, but
> it never happened so far, so you can try it.
>
> But maybe yours is totally damaged, so this wouldn't
help at all .....
>
> Regards and good luck!
>
> Olaf
>
>> -- Urspr\ufffdngliche Nachricht --
>> To: PolySix@yahoogroups.com
>> From: Andrew Mees <andrewmees@hotmail.com>
>> Date: Thu, 13 Oct 2005 17:03:28 +0800
>> Subject: [PolySix] Key Rubbers
>> Reply-To: PolySix@yahoogroups.com
>> Hi,<BR>
>> Does anyone know where I can get polysix key
rubbers from?<BR>
>> Cheers<BR>
>> Meezy<BR>




PolySix "Digiest" Page:
http://www.acc.umu.se/~amber/Poly6

  
    
---------------------------------
  YAHOO! GROUPS LINKS

  
    Visit your group "PolySix" on the web.
   
    To unsubscribe from this group, send an email to:
 PolySix-unsubscribe@yahoogroups.com
   
    Your use of Yahoo! Groups is subject to the Yahoo!
Terms of Service.

  
---------------------------------





	
	
		
___________________________________________________________ 
Yahoo! Messenger - NEW crystal clear PC to PC calling worldwide with voicemail http://uk.messenger.yahoo.com

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.