On Tue, 21 Jun 2005 22:41:33 -0000, hoggybogger wrote
load, then try to attenuate the signal up or down.
In my experience DO NOT downsample the signal to either 11025 or 8-bit. The
patch manager doesn't respond very well to that. Keep it at a high
resolution. That's the only thing that works well.
And BTW, my patch bank was uploaded in P6 format, so you might check that one
out.
Cheers
/Frank
> I have eight or so different patch dumps in WAV format that i'm tryingYou should experiment with the volume of the signal. If you can't get it to
> to load into the Patch Manager program. I can load them just fine as
> WAV files out of my computer and into the Polysix itself, but I can't
> get them into the Patch Manager program and out of the Patch Manager
> program into the Polsix.
>...
> One other thing - I used Adobe Audition to try to convert these to
> 11025/8-bit/mono, I even tried trimming them so that they are exactly
> 70k like it says in the docs for the program. Any ideas? THANKS IN
> ADVANCE!
load, then try to attenuate the signal up or down.
In my experience DO NOT downsample the signal to either 11025 or 8-bit. The
patch manager doesn't respond very well to that. Keep it at a high
resolution. That's the only thing that works well.
And BTW, my patch bank was uploaded in P6 format, so you might check that one
out.
Cheers
/Frank