OBERHEIM SYNTH

I tried this as for manual many times on my M6 and M6r, even through soundiver but I never could listenany sound from right jack. I I thought it would be interesting to have two different patches at the same timeMartin


















 



  


    
      
      
      
My bad it was actually on page 10 "When stereo is set to on, the left/mono jack outputs all sounds from single patches and the sound from the lower patch when in split mode; the right jack only outputs sound when in SPLIT mode, and this sound comes from the upper patch"

Thanks and sorry I just downloaded the manual from the files area,Jason
On May 19, 2013, at 4:12 PM, "elwro07" <elwro07@...> wrote:
















 



    
      
      
      
Well, have you read the owner's manual ?

Everything about the outputs is explained on page 8.



--- In oberheim@yahoogroups.com, "Jason Budris" <jsunbud@...> wrote:

>

> I just purchased a used matrix 6 and am wondering why when I hard pan left i get no sound. Is it a bad out you think?

> 

> Thanks,

> Jason

>

Hi Martin,

I recently bought a M6r and on page 11 in the manual it says that you have to set param 56 in Master mode to Stereo "ON" and then the right jack will output the upper sound in Split mode. Have not tried it myself as I only have one input to spare for the M6r.

/Johan