AFAIK M6 and M6R are basically the same... Daniel Forro On 18 Jan, 2014, at 1:59 AM, Bob Grieb wrote: > > > OK, I grabbed the 10937 display driver data sheet. Had forgotten that > it uses a serial interface. That should simplify the circuit. > Probably just the PIC chip and some small circuitry to adjust > the backlight using the display brightness setting. So really > the interesting part will be the mechanics of fitting it into the > unit. Seems like the old display and possibly the drive chip > will need to be removed to make room. When I get home I > will take the Matrix 6R apart and check out the display board > layout. Also need to make sure there is enough current available > on the 5V supply to power the backlight. > > Bob >
Message
Re: [oberheim] Matrix-6 display issues?
2014-01-17 by Daniel Forró
Attachments
- No local attachments were found for this message.