Lpc2000

My requirement is basically to transmit data from one microcontroller (LPC2138) to the other at 100MHz. Thus the clock generated must synchronize the data. Si4112 has IF out relying upon its separate crystal. This may cause data transition mismatch with driving clock. So its preferable to generate clock from LPC2138. Please suggest any outcome.
 
Sudip

weverest3 <weverest@...> wrote:
--- In lpc2000@yahoogroups.com, sudip nag <sudipnag1@y...> wrote:
> I would like to generate 60 MHz to 100 MHz clock, in controlled step 
of 1 MHz, with 50% duty cycle using LPC2138. Any suggestion how to 
generate the same. Match functionality is inappropriate for generating 
such high frequency.

The Si4112 (derivative of Si4133) from www.silabs.com has an output 
from 62 MHz to 1 GHz (and the part will work lower). They are 
available from Digikey.

-Wallie




---------------------------------
Yahoo! Groups Links

   To visit your group on the web, go to:
http://groups.yahoo.com/group/lpc2000/
  
   To unsubscribe from this group, send an email to:
lpc2000-unsubscribe@yahoogroups.com
  
   Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 


		
---------------------------------
 Free antispam, antivirus and 1GB to save all your messages
 Only in Yahoo! Mail: http://in.mail.yahoo.com

[Non-text portions of this message have been removed]