Lpc2000

----- Original Message ----- 
From: "soren_t_hansen" <soren_t_hansen@...>
To: <lpc2000@yahoogroups.com>
Sent: Friday, April 29, 2005 7:51 AM
Subject: [lpc2000] Olimex JTAG


I just bought an Olimex JTAG (Wiggler) and keeps getting the internal
error 43 when trying to connect with OCDRemote. I've tested with an
Ohm-meter to see if there is a connection between pin 8 and 15 on the
LPT connector, and it seems as if they are not connected. I found some
postings where someone said, that in order to work with OCDRemote
versions higher than 2.06 these to pins should be connected - is that
correct?

Does anyone have a OCDRemote version 2.06, so I can try this out?


Check with Olimex about that connection. You could make it yourself quite 
easily, of course. I don't know about OCDRemote, but it is definitely 
required with the current OCD Commander. It isn't needed with any other 
software, of course.

Regards,

Leon