Lpc2000

I made the wiggler board according to the file named "Wiggler 
Schematic.pdf" in the JTAG folder.
I haven't tried OCD Commander, I will do it immediately.

Thanks

--- In lpc2000@yahoogroups.com, "Leon Heller" <leon.heller@d...> 
wrote:
> ----- Original Message ----- 
> From: "yekai1k" <yekai1k@y...>
> To: <lpc2000@yahoogroups.com>
> Sent: Friday, April 08, 2005 2:26 AM
> Subject: [lpc2000] Wiggler with LPC2124
> 
> 
> >
> >
> > Hi
> >
> > I made a wiggler board according to the Wiggler Schematic posted 
in the
> > Files folders, but it can not work properly with my LPC2124 
chips.
> >
> > I'v tried many RDI software like BanyanII
(http://armdebug.27h.com/)
> > ARMJtagDebugFinal 1.5.1 (http://armjtag.27h.com) and some 
others, none
> > could work with my board.
> >
> > Both BanyanII and ARMJtagDebugFinal could detect ARM7TDMI-S 
core, but
> > while debugging, BanyanII report "warning 05 data abort",
> > ARMJtagDebugFinal did download the ture promgram to the chip, it 
just
> > could control the chip to run or stop.
> >
> > Did anyone have the same experience like me?
> > Could you give me some advises?
> 
> Have you tried the Macraigor OCD Commander software? That is 
intended for 
> use with the Wiggler. Which Wiggler schematic did you use?
> 
> Leon
> --
> Leon Heller, G1HSM
> http://www.geocities.com/leon_heller