Lpc2000

Hi Milos,

Yes, I have enabled the timer interrupt in timer module.

And i have initialized the VIC registers also.

Please have a look at that register values.

/*Timer initialization */

	TIMER1_TCR = 0x0;				// Reset

//	TIMER1_TC = 0x0;				// Timer Counter

	TIMER1_PR = 2500;				// Prescale register

//	TIMER1_PC = 0x0;				// Prescale Counter

	TIMER1_MR0 =1000;				// Match Register

	TIMER1_MCR = 0x3;				// Generate interrupt and reset when match occurs.


	/* Timer 1 interrupt is an IRQ interrupt */
	VICIntSelect &= ~0x20;
  /* Enable timer 1 interrupt */
  	VICIntEnable = 0x20;
  /* Use slot 0 for timer 1 interrupt */
  	VICVectCntl0 = 0x25;
  /* Set the address of ISR for slot 0 */
  	VICVectAddr0 = (unsigned int)IRQHandler;



	MSR cpsr_c,#0x13			// This assembly instruction for enabling the processor
interrupts.

Please have a look at the register values and let me know where i am doing
the mistake.

Thanks in advance.

Regards,
-Srinivas.

Thanks and best regards,
Srinivas,
ARM-ODC,
Tata Elxsi,
Office : +91 80 22979581
Mobile : +91 98802 72705




-----Original Message-----
From: Milos Prokic [mailto:mproki@...]
Sent: Monday, February 21, 2005 9:58 PM
To: lpc2000@yahoogroups.com
Subject: RE: [lpc2000] Timer 1 Interrupt problem in LPC2106



Did you enable the timer interrupt in the timer module?

Did you set the following registers accordingly -  VICIntSelect,
VICIntEnable,  VICVectAddrX ,VICVectCntlX ?

Did you enable the interrupts globally, ie in the core (status register)?

Cheers,

m.

  _____

From: mannem_sri [mailto:mannem_sri@...]
Sent: Monday, February 21, 2005 3:31 AM
To: lpc2000@yahoogroups.com
Subject: [lpc2000] Timer 1 Interrupt problem in LPC2106




Hi,

I am trying to generate an interrupt using Timer1 in LPC2106.

I put 0xff in match register.

The timer is incrementing and restting whenever it matches the match
register value.

But it is not generating the interrupt when match occurs.

I am running my program from SARM. I have done the memory mapping
also.

I have written the program with referrence of AN10254.

I am using arm compilers to build the project.

Please help me in getting the interrupt.

If you have anu exampled programs please send it to me.

Thanks in advance.

Regards,
-Srinivas.








Yahoo! Groups Sponsor



<http://us.ard.yahoo.com/SIG=129s5mq14/M=324658.6070095.7083352.3001176/D=gr
oups/S=1706554205:HM/EXP=1109061053/A=2343726/R=0/SIG=12if5c1ch/*http:/clk.a
tdmt.com/VON/go/yhxxxvon01900091von/direct/01/&time=1108974653580313>
<http://us.ard.yahoo.com/SIG=129s5mq14/M=324658.6070095.7083352.3001176/D=gr
oups/S=1706554205:HM/EXP=1109061053/A=2343726/R=1/SIG=12if5c1ch/*http:/clk.a
tdmt.com/VON/go/yhxxxvon01900091von/direct/01/&time=1108974653580313>

Get unlimited calls to
<http://us.ard.yahoo.com/SIG=129s5mq14/M=324658.6070095.7083352.3001176/D=gr
oups/S=1706554205:HM/EXP=1109061053/A=2343726/R=1/SIG=12if5c1ch/*http:/clk.a
tdmt.com/VON/go/yhxxxvon01900091von/direct/01/&time=1108974653580313>

U.S./Canada
<http://us.ard.yahoo.com/SIG=129s5mq14/M=324658.6070095.7083352.3001176/D=gr
oups/S=1706554205:HM/EXP=1109061053/A=2343726/R=1/SIG=12if5c1ch/*http:/clk.a
tdmt.com/VON/go/yhxxxvon01900091von/direct/01/&time=1108974653580313>


<http://view.atdmt.com/VON/view/yhxxxvon01900091von/direct/01/&time=11089746
53580313>



<http://us.adserver.yahoo.com/l?M=324658.6070095.7083352.3001176/D=groups/S=
:HM/A=2343726/rand=260539174>



  _____

Yahoo! Groups Links

*	To visit your group on the web, go to:
http://groups.yahoo.com/group/lpc2000/

*	To unsubscribe from this group, send an email to:
lpc2000-unsubscribe@yahoogroups.com
<mailto:lpc2000-unsubscribe@yahoogroups.com?subject=Unsubscribe>

*	Your use of Yahoo! Groups is subject to the Yahoo!
<http://docs.yahoo.com/info/terms/>  Terms of Service.



[Non-text portions of this message have been removed]




Yahoo! Groups Links