Lpc2000

Gus,

I ported uIP to the E2124 and it works on that part, but that's in
polled mode.  I don't have a port of uIP for that board as I don't have
the board.

If you have any success with it, please let me know--I'd be interested
to see what you make of the board as it's way over specified to run uIP,
better would be lwIP.

--
Paul Curtis, Rowley Associates Ltd  http://www.rowley.co.uk
CrossWorks for MSP430, ARM, AVR and (soon) MAXQ processors 

> -----Original Message-----
> From: Gus [mailto:gus_is_working@...] 
> Sent: 07 February 2005 15:39
> To: lpc2000@yahoogroups.com
> Subject: [lpc2000] olimex LPC-E2294 with ethernet
> 
> 
> 
> Hello,
> 
> I spent all weekend trying to get the ethernet to work on olimex LPC-
> E2294 board http://www.olimex.com/dev/lpc-e2294.html with no luck
> 
> Looking at the board schematics, they have the Ethernet chip 
> "selected" all the time through R57!!! This is WRONG!! I 
> don't understand why!!! So I removed R57 and installed R56 
> instead. Now, when I read the chip, I always get the "chip 
> ID" no matter what register I select!
> 
> Was anyone able to read the registers from CS8900A? Any 
> hints? Even with thier test code, I wasn't able to get things 
> going. The plan is to get uIP going on that board 
> http://www.sics.se/~adam/uip/
> 
> Thanks,
> 
> Gus
> 
> 
> 
> 
> 
> 
>  
> Yahoo! Groups Links
> 
> 
> 
>  
> 
> 
> 
> 
>