Lpc2000

Another thought - are you sure that you don't have a poor solder joint on
the LPC chip? It might be worth inspecting them all very carefully; I prod
them with a scalpel tip and see if they move, using a powerful magnifier, if
I'm not sure. I've had virtually no trouble with solder joints since I got a
Metcal soldering station with a 'mini-hoof' tip made especially for drag
soldering.

Leon
--
Leon Heller, G1HSM
Email: aqzf13@...
My low-cost Philips LPC210x ARM development system:
http://www.geocities.com/leon_heller/lpc2104.html