Lpc2000

Robert,

> James, not much help, more of a verification step.  Have you tried
> performing an experiment where you do 10 or so of each method (manual
sync 
> and read device id) and recording the results?

Well, I gave up at 5 times.  The utility failed 5 for 5, and
Hyperterminal worked 5 for 5, and I called it a trend.  I did hyperterm,
utility, hyperterm, utility, etc. cycling the target power between each
try and completely closing down one application before starting the
next.  I'm now trying to get a serial monitor on it to figure out why
the utility is giving up; it doesn't offer much in the way of logging or
diagnostics.

> Also, does this happen on multiple boards?  It sounds like this might 
> be
> the first board you are bring up?

This is our first board.  We're actually trying to verify it before we
build up some more, but I'm going ahead and starting a second board.
Note that we did change the LPC2106 once on this board, just to make
sure we didn't have a bum part.

Thanks,

-James