Lpc2000

Thanks Michael, I'll compare to others and see what transpires.
But it's good to hear your pos experience with the Keil board.

-- Kris

----- Original Message -----
From: "Michael J. Pont"
To: <lpc2000@yahoogroups.com>
Sent: Monday, April 19, 2004 8:58 PM
Subject: [lpc2000] Keil MCB2100 board


> There has been some discussion about the Keil MCB2100 board in the last
day
> or so.
>
> I've been using the Keil MCB2100 boards from Keil for several months.
> Except for the CAN (which seems to be problematic - because of a chip
> "feature", not a board issue), this has been fine.
>
> I got the boards from Hitex (UK).  They were listed on the Hitex WWW site
> last time I looked (along with numerous other ARM boards).
www.hitex.co.uk
>
> I paid less than Stlg 100.00 / board (including tax and shipping) - about
> $150 (US).
>
> I've been using this with the Keil / GCC tools (free evaluation version),
> and using the Philips ISP software for downloading (I have a Keil ULink
JTAG
> connector, but have not yet made much use of this).
>
> This combination is very cheap, and has worked well for me.  (I've also
used
> the same setup with classes of students, again without any problems).
>
> Michael.