Hi ,
Sorry that link for open source was wrong so making a correction
It is (LPC -214x USB Stack)
https://sourceforge.net/projects/lpcusb
Thanks & regards,
Pratik.
pratik pujar <pratikpujar@...> wrote: Hi everybody,
I am using LPC 214x USB stack (open source can be downloaded from https://sourceforge.net/cvs/?group_id=160384 ) on my proprietary ARM board with LPC 2148 microcontroller chip.
But I am facing problems.
When i run it , and plug in then USB LINK led lights up and when unplugged goes off.
But my linux machine is not able to detect any USB device when plugged in and on windows machine it shows "Unknown USB device attached."
When i enable debug prints then results what i found is that the device is not getting end point (EP SLOW) interrupts.
Where as at the end of main function there is continuous while loop polling for interrupt. In which it checks value of USB device Interrupt status register(0xE0090000) and accordingly call handler routines.
Am i missing with anything ? is there anything i need to do?
Please help me.
Thanks & regards,
Pratik.
---------------------------------
Yahoo! Messenger with Voice. Make PC-to-Phone Calls to the US (and 30+ countries) for 2¢/min or less.
[Non-text portions of this message have been removed]
SPONSORED LINKS
Microcontrollers Microprocessor Intel microprocessors
---------------------------------
YAHOO! GROUPS LINKS
Visit your group "lpc2000" on the web.
To unsubscribe from this group, send an email to:
lpc2000-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
---------------------------------
---------------------------------
Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls. Great rates starting at 1¢/min.
[Non-text portions of this message have been removed]Message
Re: [lpc2000] USB driver problem LPC-2148
2006-06-01 by pratik pujar
Attachments
- No local attachments were found for this message.