Lpc2000

--- In lpc2000@yahoogroups.com, "Guillermo Prandi" 
<yahoo.messenger@...> wrote:
>
> Brendan, Jayasooriah already said that the problem didn't go away 
> with Philips' new bootloader. It only went away with Jayasooriah's 
> own bootloader.
> 
> Guille
> 

Guille,

Jayasooriah provides a description of a problem with an application 
using IAP. With the details provided I'd find it difficult to establish 
if the problem is with the application, the IAP functions or some 
combination of the two.

I'm trying to find out if there's a problem with the boot loader, which 
as I've explained we use to program the devices.

If there's any confision, I'll try and make the question simpler: "is 
there a problem with the boot loader that could cause it to fail to 
function, and if so, under what circumstances?"

In case there's any confusion over what the boot loader is: my 
understanding is that it's the first piece of software to run on the 
device, the primary function of which is to start any valid application 
it finds in flash or to load the flash through the serial port. This is 
the thing I'm being told is "broken".

I hope this clarifies matters.

Brendan