Lpc2000

--- In lpc2000@yahoogroups.com, "Leon Heller" <leon.heller@...> wrote:
>
> ----- Original Message ----- 
> From: "davidbinar" <david.berg@...>
> To: <lpc2000@yahoogroups.com>
> Sent: Monday, February 06, 2006 9:26 AM
> Subject: [lpc2000] Olimex 2294-board missing PWR Jack?
> 
> 
> >I just got my Olimex 2294-board from Sparkfun. Are you supposed to
> > solder on a power jack yourself? If not, mine's missing and there 
is
> > three holes in the board. Also, next to the place where the power 
jack
> > is supposed to be there's a D5 missing. Is that also something 
you have
> > to supply yourself?
> 
> Sounds like they forgot to put them on, although it's difficult to 
see how 
> the board was tested without them. Perhaps they don't test them!
> 
> Leon
>

Thanks for your answers. I guess they can use the USB port for power. 
I use it now to power the board. And the test program that comes 
loaded in flash shows up ok so I hope there's nothing wrong with the 
board (except lacking a power jack that is...).

/David