Lpc2000

Thanks for reply!

Have you used the KEIL or IAR compiler?
How is the best?



2005/12/29, rtstofer <rstofer@...>:
>
> --- In lpc2000@yahoogroups.com, André "Away" Rairan. <a.rairan@g...>
> wrote:
> >
> > Hi,
> >
> > I'm from Brazil and i starting to study de ARM processor.
> >
> > How is the best IDE to ARM development?
>
> Maybe not 'best' but 'free' is good so check out the tutorial here
> http://www.olimex.com/dev/pdf/ARM%20Cross%20Development%20with%<http://www.olimex.com/dev/pdf/ARM%20Cross%20Development%20with%25>
> 20Eclipse%20version%203.pdf  There are problems with the JTAG
> debugging but it does work, sort of.  I didn't have enough pins left
> to support JTAG so I really don't care if the free OCD Remote works,
> or not.
>
> > How is the best (more apropriated) chip to start my study?
>
> If you don't have specific project goals and you don't need A/D then
> the LPC2106 is pretty nice.  I like the Olimex boards so check out
> www.sparkfun.com and consider any of these Development Boards -> LPC
> http://www.sparkfun.com/commerce/categories.php?
> cPath=2_25&osCsid=b9ddaec7d2d3f39653583caf3ef98a8a
>
> Specifically, I am using the LPC2106 Prototyping Board and it works
> pretty well http://www.sparkfun.com/commerce/product_info.php?
> products_id=269&osCsid=b9ddaec7d2d3f39653583caf3ef98a8a
>
> You do not need to buy the JTAG interface if you don't plan to use
> it for debugging.  The built in serial ISP works very well and uses
> the RS232 port.
>
> So, for the LPC2106, $60 plus shipping.  Pretty reasonable for a 32
> bit chip with 128k flash and 64k ram.
>
> Richard
>
>
>
>
>
>
> SPONSORED LINKS
>   Microprocessor<http://groups.yahoo.com/gads?t=ms&k=Microprocessor&w1=Microprocessor&w2=Microcontrollers&w3=Pic+microcontrollers&w4=8051+microprocessor&c=4&s=93&.sig=tsVC-J9hJ5qyXg0WPR0l6g>
> Microcontrollers<http://groups.yahoo.com/gads?t=ms&k=Microcontrollers&w1=Microprocessor&w2=Microcontrollers&w3=Pic+microcontrollers&w4=8051+microprocessor&c=4&s=93&.sig=DvJVNqC_pqRTm8Xq01nxwg> Pic
> microcontrollers<http://groups.yahoo.com/gads?t=ms&k=Pic+microcontrollers&w1=Microprocessor&w2=Microcontrollers&w3=Pic+microcontrollers&w4=8051+microprocessor&c=4&s=93&.sig=TpkoX4KofDJ7c6LyBvUqVQ>  8051
> microprocessor<http://groups.yahoo.com/gads?t=ms&k=8051+microprocessor&w1=Microprocessor&w2=Microcontrollers&w3=Pic+microcontrollers&w4=8051+microprocessor&c=4&s=93&.sig=1Ipf1Fjfbd_HVIlekkDP-A>
>  ------------------------------
> YAHOO! GROUPS LINKS
>
>
>    -  Visit your group "lpc2000 <http://groups.yahoo.com/group/lpc2000>"
>    on the web.
>
>    -  To unsubscribe from this group, send an email to:
>     lpc2000-unsubscribe@yahoogroups.com<lpc2000-unsubscribe@yahoogroups.com?subject=Unsubscribe>
>
>    -  Your use of Yahoo! Groups is subject to the Yahoo! Terms of
>    Service <http://docs.yahoo.com/info/terms/>.
>
>
>  ------------------------------
>



--
Atenciosamente,
André "Away" Rairan.


[Non-text portions of this message have been removed]