Lpc2000

----- Original Message ----- 
From: "gokbektas" <gokbektas@...>
To: <lpc2000@yahoogroups.com>
Sent: Saturday, February 21, 2004 9:33 AM
Subject: Re: [lpc2000] LPC2106 Programming - ISP and hex file


> -I programmed chip with Philips ISP
> -Then closed ISP program
> -Opened terminal window in crossworks
> -Selected com port and baud rate
> -Opened com port in terminal window
> -Then removed the bootloader jumper
> -Pressed reset button...
>
> there is nothing... may be I should check soldering of the chip again (I
did it myself)
>
> Could anyone send me a tested hex file for testing uart or pins @ 10MHz
for LPC2106?

I sent the hex file I used.

I checked with the CrossWorks terminal utility (I was using RealTerm) and it
worked OK with that.

Leon