Lpc2000

I didn't want to bother all 2000+ members with something far away 
from LPC2000 stuff this is why yesterday I personally responded to 
your e-mail, but obviously you want to continue this way so I'll 
bite. 
I check all correspondence between you and Olimex's support and found:
to every your question for support is responded within couple of 
hours from our peoples.
Correct me if I'm wrong but there is not topic or qustion you asked 
left open or not explained.
Can you quote when you have asked for help Olimex and from our 
support is responded "that they don't know what is all about"?
I would appreciate to see this e-mail forward it to "usunov at olimex 
dot com".

Thanks
Tsvetan

--- In lpc2000@yahoogroups.com, rseku <rseku@p...> wrote:
>
> I forgot to mention, that schematic contain supply voltage as 
misterious 
> VCC, which can mean any value !!!
> I received response from olimex support, that they don't know what 
is 
> all about!
> 
> robert
> 
> 
> rseku wrote:
> 
> > Dear Olimex support!
> > On the CS8900 ethernet board, there significant inconsistencies 
between 
> > schematic and board:
> > 1. On board label D11 - On schematic no such label
> > 2. On schematic R11 installed - on board not
> > 3. On schematic connector pins exist as C2.1 -> c2.16, on board 
17 -> 32
> > 4. On board only top side has parts labels, bottom parts is you 
secret
> > 
> > 
> > Do You take responsibility for these inconsistencies in case of 
> > potential board damage caused by them?
> > 
> > Regards
> > robert seczkowski
> > 
> > 
> > 
> > 
> > 
> >  
> > Yahoo! Groups Links
> > 
> > 
> > 
> >  
> > 
> > 
> > 
> >
>