Yahoo Groups archive

The Logic Off Topic list

Index last updated: 2026-04-28 23:27 UTC

Message

Re: [L-OT] MIXERS , Dangerous audio, WAveburner questions....

2004-10-24 by Joshua Binder

> re: sound card
> am also considering the RME MADI as a possiblity to get more than 26 outputs
> seeing as our beloved EMAGIC does not allow using multiple hardware since
> "UP"grading to OSX...
> 
> used to do 2 Multifaces to get 56 outs. cant do that in OSX..Boo!
> Bought an 002 thinking with a digi HW i could use DAE simultaneous with Core
> audio.
> was wrong and now have an 002 sitting in the rack purely for Protools
> conversion to and from...Logic PRo...
> 
> anyone know what the deal with WAVEBURNER is now there is no OSX WB
> support....

I went with PTHD with the API8200/7800/7600 rackmount based system and just
got a 10 slot lunchbox full of API 512c mic pres. So now I have big fader,
little fader, and enough pres to track a pretty serious drum session. Plus I
got to get rid of so many cables and a few patchbays and have less problems
when I change something in my studio around now, everything sounds awesome,
got the Mackie Control Universal with 2 xt¹s so I can use with Logic and w/
Pro Tools for doing automation Rides, and it CLEAN, FAT, PUNCHY and just
plain awesome, I actually put an older SSL Logic FX G384 Compressor over the
2-buss, but its the old one not the new POS silver one. IN any case, I am an
SSL guy and have been for a while but this system has been so awesome I have
not been in a studio to do a mix in many many months as most of my clients
have been extatic and so have I.

My recommendation is to abandon the analog board, unless you¹ve got a big
room and a big enough wallet to invest in an SSL G or old API or something
like that, the best results I¹ve got have been with a good summing buss a
good front end and enough processing power to have a party.
jb

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.