Korg Poly800/EX800 Users

Hi @all,

can anyone tell me, what´s the difference between the POLY800-MK1 and
MK2?


Thank you,

ski

>can anyone tell me, what�s the difference between the POLY800-MK1 and
>MK2?

Mk 1 has a chorus, Mk 2 has a delay
Mk 1 is sort of brown and green, Mk 2 is black and blue
Mk 1 can't do sysex, Mk 2 can.

Also I think the Mk 2 is less succeptible to crashing and losing all the
patches.


_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp

In addition to having delay instead of chorus, the Poly-800 II also had two
parameters for EQ. And it allowed the sequencer to be put into repeat mode.

The parameters were also shuffled a bit so parameter 41 didn't control the
same thing on both instruments.

My firsthand experience, many years ago, told me that the same settings
programmed into the Poly-800 and Poly-800 II produced sounds that were not
identical. And it wasn't just delay or chorus and EQ. There were subtle
differences.

Mike

fitzgera@...
http://www.eclipse.net/~fitzgera

Hi,

there were also some improvements during the mk1-phase:

The first one's had no backup battery, all patches were lost when the
poly800 has been turned off.
2nd step has some areas on its PCB so its possible to add a backup battery
on your own.
3rd step has an in-built battery so the patches are never lost, also if you
put away power supply and batteries at the same time!

But, it often looses its patches if you connect it to a sequencer, I think
that's fixed on the Mark 2?

Olaf

----- Original Message -----
From: <ski55@...>
To: <korgpolyex@yahoogroups.com>
Sent: Saturday, October 20, 2001 5:53 PM
Subject: [korgpolyex] MK1 and MK2


Hi @all,

can anyone tell me, what´s the difference between the POLY800-MK1 and
MK2?


Thank you,

ski




To unsubscribe from this group, send an email to:
korgpolyex-unsubscribe@yahoogroups.com



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Hi!

I'm new to this list since I just few months ago bought
my Korg-Poly 800 Mk1. I had this really weird problem when
I hooked my poly-800 to a computer sequencer. Suddenly all
the patches disappeared! Fortunately I hadn't made many
of my own presets so the loss wasn't that big and I could
find the factory presets from the net that I succesfully
loaded in.
Can anyone tell in what circumstances this patch disappearing usually
happens?

Regards,
Sami

Hi Sami,

it seems to be a software bug.

Can you tell me the URL where to find the factory presets?

Thank you,

ski



At 12:32 21.10.01 +0300, you wrote:

>Hi!
>
>I'm new to this list since I just few months ago bought
>my Korg-Poly 800 Mk1. I had this really weird problem when
>I hooked my poly-800 to a computer sequencer. Suddenly all
>the patches disappeared! Fortunately I hadn't made many
>of my own presets so the loss wasn't that big and I could
>find the factory presets from the net that I succesfully
>loaded in.
>Can anyone tell in what circumstances this patch disappearing usually
>happens?
>
>Regards,
>Sami
>
>
>To unsubscribe from this group, send an email to:
>korgpolyex-unsubscribe@yahoogroups.com
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

Hi ski,

I found the factory presets from http://www.analog.no

Sami

>Can anyone tell in what circumstances this patch disappearing usually
>happens?

This is quite a frequent problem for the Poly 800. Generally it's caused by
something sending it midi data that it can't understand. So it's best to
try to filter out everything but note on/off, pitch and modulation, and
patch changes.

_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp