Synth-DIY Yahoo! Groups Archives

Re: Bank Select CC problems

2012-10-26 by Michael Hawkins

Blaine,

I just found a bug in the bank select CC code. It was not changing the banks at all.

Now, I am looking at a couple of other items that I may have time to put into the new fixed code before I release it.

Give me a couple of days and I will let you know early next week if I just put the fixed code out there or if I will delay a bit and try to get some of these other nice things done before the new code comes out.

Mike

From: Blaine Perkins <bperkins211@...>
To: Michael Hawkins <KorgPolyEx800@...>
Sent: Saturday, October 20, 2012 3:49 PM
Subject: Bank Select CC problems

Hey Mike,
I had a post mixed in with todays DCO chat.

I cant seem to get a CC##32 of any value to make the hawk do a bank select.. any ideas?

Thanks,
Blaine

Re: Bank Select CC problems

2012-10-26 by bimmerfan222

Thanks for letting me know.

I can just shelf that CC#.. I probably already have it setup in my GUI project correctly anyway.. no biggie to not have that feature until later on with the other items completed in the new code.

At least I know now what's wrong.

I might mention, I noticed that some of the Waveform Selects for SLFO/LFO's/DCO', etc. have more numbers to select than the manual says that parameter should have to choose from.
ALL of them seem to go up to 13 waveforms when the manual shows only 8 or 11.
Are they suppose to have the extra values?

-Blaine

--- In korgpolyex@yahoogroups.com, Michael Hawkins <korgpolyex800@...> wrote:
>
> Blaine,
>
> I just found a bug in the bank select CC code. It was not changing the banks at all.
>
> Now, I am looking at a couple of other items that I may have time to put into the new fixed code before I release it.
>
> Give me a couple of days and I will let you know early next week if I just put the fixed code out there or if I will delay a bit and try to get some of these other nice things done before the new code comes out.
>
> Mike
>
>
>
>
>
> ________________________________
> From: Blaine Perkins <bperkins211@...>
> To: Michael Hawkins <KorgPolyEx800@...>
> Sent: Saturday, October 20, 2012 3:49 PM
> Subject: Bank Select CC problems
>
>
> Hey Mike,
> I had a post mixed in with todays DCO chat.
>
> I cant seem to get a CC##32 of any value to make the hawk do a bank select.. any ideas?
>
> Thanks,
> Blaine
>

Re: [korgpolyex] Re: Bank Select CC problems

2012-10-27 by Michael Hawkins

Yes, the extras are EG3 and EG3 inverted mode. So basically, most if not all of the LFO selectors also allow using EG3 as a modulator source.

From: bimmerfan222 <bperkins211@...>
To: korgpolyex@yahoogroups.com
Sent: Friday, October 26, 2012 6:18 PM
Subject: [korgpolyex] Re: Bank Select CC problems

Thanks for letting me know.

I can just shelf that CC#.. I probably already have it setup in my GUI project correctly anyway.. no biggie to not have that feature until later on with the other items completed in the new code.

At least I know now what's wrong.

I might mention, I noticed that some of the Waveform Selects for SLFO/LFO's/DCO', etc. have more numbers to select than the manual says that parameter should have to choose from.
ALL of them seem to go up to 13 waveforms when the manual shows only 8 or 11.
Are they suppose to have the extra values?

-Blaine

--- In korgpolyex@yahoogroups.com, Michael Hawkins <korgpolyex800@...> wrote:
>
> Blaine,
>
> I just found a bug in the bank select CC code. It was not changing the banks at all.
>
> Now, I am looking at a couple of other items that I may have time to put into the new fixed code before I release it.
>
> Give me a couple of days and I will let you know early next week if I just put the fixed code out there or if I will delay a bit and try to get some of these other nice things done before the new code comes out.
>
> Mike
>
>
>
>
>
> ________________________________
> From: Blaine Perkins <bperkins211@...>
> To: Michael Hawkins <KorgPolyEx800@...>
> Sent: Saturday, October 20, 2012 3:49 PM
> Subject: Bank Select CC problems
>
>
> Hey Mike,
> I had a post mixed in with todays DCO chat.
>
> I cant seem to get a CC##32 of any value to make the hawk do a bank select.. any ideas?
>
> Thanks,
> Blaine
>