multiple source cv to single destination?
2011-07-28 by k9k9dog
sorry for piping up here, but i read about
the multiple cv in thing.
i'm a synthedit user, so i don't know if it applies,
but if i want to have the option to have several
voltages addressing one voltage range, i use a
control comparator to control the cv input:
eg, if higher than zero, the switch goes on.
my cv input is then governed by a divider, which
has a default of 1(can't div by zero), each
additional input adds one to the divider; so if
i have to cv inputs, the total is divided automa-
tically by 2 and so on; dunno if this applies in
realworld situations and what dangers are ;-/
the multiple cv in thing.
i'm a synthedit user, so i don't know if it applies,
but if i want to have the option to have several
voltages addressing one voltage range, i use a
control comparator to control the cv input:
eg, if higher than zero, the switch goes on.
my cv input is then governed by a divider, which
has a default of 1(can't div by zero), each
additional input adds one to the divider; so if
i have to cv inputs, the total is divided automa-
tically by 2 and so on; dunno if this applies in
realworld situations and what dangers are ;-/