Korg Poly800/EX800 Users

If the X5DR Manual could be helpful you can load it from Korg...
I don't know if it is similar to the X5D but I think so

http://www.korg.com/downloads/pdf/X5DR_Manual.pdf

Ciao
Peter

\|/
(o o)
--oOOO--(_)--OOOo------------------------------------------------------
Ing. Peter Ullrich mailto:peter.ullrich@...
Homepage: www.ullrich.at.tt , http://come.to/ullrich
Phone: +43-1-81111-1894 Fax: +43-1-81111-8670
.oooO Hardware & Software Developer / Electronic Musician
( ) Oooo. Kapsch TrafficCom AG Vienna / Austria
\ ( ( ) http://www.kapsch-trafficcom.com/
-----\_)----) /--------------------------------------------------------
(_/

This e-mail and any attachment and the included information are confidential,
protected by copyright and intended solely for the use of the named
recipient(s). If you are not the named recipient any disclosure, copying,
distribution or retention of this e-mail is prohibited and may be unlawful. If
you are not the intended recipient, please inform us immediately, delete this
e-mail and all attachments from your system, and refrain from taking any other
action in reliance to this e-mail.

Interesting information on the X5:

http://cc.joensuu.fi/~jsimonen/KorgFAQ.html

And now back to the Polyex...

Ciao
Peter

\|/
(o o)
--oOOO--(_)--OOOo------------------------------------------------------
Ing. Peter Ullrich mailto:peter.ullrich@...
Homepage: www.ullrich.at.tt , http://come.to/ullrich
Phone: +43-1-81111-1894 Fax: +43-1-81111-8670
.oooO Hardware & Software Developer / Electronic Musician
( ) Oooo. Kapsch TrafficCom AG Vienna / Austria
\ ( ( ) http://www.kapsch-trafficcom.com/
-----\_)----) /--------------------------------------------------------
(_/

This e-mail and any attachment and the included information are confidential,
protected by copyright and intended solely for the use of the named
recipient(s). If you are not the named recipient any disclosure, copying,
distribution or retention of this e-mail is prohibited and may be unlawful. If
you are not the intended recipient, please inform us immediately, delete this
e-mail and all attachments from your system, and refrain from taking any other
action in reliance to this e-mail.

Hey Thanks, Peter. I didn't know that pdf existed! See, I sold my X5D
to a friend, and I couldn't find the damned manual anywhere. There
was one on ebay lastweek, but I was sniped. I was beaten by my game.

Anyway, sorry for the OT post. I normally don't post here, but I am
about to rekindle my Poly800. I have a parts board on its way. Then
I'll have my original synth back to its former glory! Then I'll mod
and paint it. You can take the circuit away from the bender, but you
can't take the bender out of the circuit. That made absolutley zero
sense......

I have to replace the back up battery since it's been sitting for so
long. Does anyone know what battery to get off hand? No big deal, I
can unsolder the dead one to find out.

Also, I can't say exactly which, but there is an IC with a wire
soldered between 2 pins. I bought the poly used 10 years ago, so I
assume it was some after market mod. Does anyone know anything about
that? Again, I don't have the board in front of me, so I can't say
which IC it was.

-Mike