Korg Poly800/EX800 Users

I have some Eprom programmers and lots of 27128 and 27C128.
So copying would be an easy job. The schematics and if possible PCB scans would
be needed to make a copy of the mdk retrofit. We could make PCBs with the EAGLE
pcb design software (freeware if the size is maximum 10x8cm).

I don't know where you come from, I am from Austria. So if you are from Europe
shipping
would not be too expensive. I would pay for the postage from you to me and
back...

If you are from the States maybe another guy could do it near you...

Ciao
Peter

\|/
(o o)
--oOOO--(_)--OOOo------------------------------------------------------
Ing. Peter Ullrich mailto:peter.ullrich@...
Homepage: www.ullrich.at.tt , http://come.to/ullrich
Phone: +43-1-81111-1894 Fax: +43-1-81111-8670
.oooO Hardware & Software Developer / Electronic Musician
( ) Oooo. Kapsch TrafficCom AG Vienna / Austria
\ ( ( ) http://www.kapsch-trafficcom.com/
-----\_)----) /--------------------------------------------------------
(_/

This e-mail and any attachment and the included information are confidential,
protected by copyright and intended solely for the use of the named
recipient(s). If you are not the named recipient any disclosure, copying,
distribution or retention of this e-mail is prohibited and may be unlawful. If
you are not the intended recipient, please inform us immediately, delete this
e-mail and all attachments from your system, and refrain from taking any other
action in reliance to this e-mail.

> I don't know where you come from, I am from Austria. So if you are
> from Europe shipping would not be too expensive. I would pay for the
> postage from you to me and back...
> If you are from the States maybe another guy could do it near you...

I live In Brazil, and I also have lots of 27128 and an EPROM burner

If you have the schematics, just send it to me and I can route a
board.