Korg Poly800/EX800 Users

Hi,

Has anyone used the Poly-800's tape load/save with a sampler?  If so, did
it work well?  I am thinking I could simply back my patches up to the
sampler and then load them as I see fit.  I am afraid of any A/D
conversion possibly tampering with the signal, though.  Like when you
record a sync track to tape and have to turn off noise cancellation on
that track.

Any experiences?

Thanks
tim

Hi Tim. 
I remember doing this waaaay back in the day with an Ensoniq Mirage. Boy do I miss programming in Hex.....Not!
As I recall it was a lot of trouble getting the levels right to make it reliable. 
Of course that sampler was very crude. A modern sampler should be much easier to accomplish this with.
Good luck.
Electrohead


--- In korgpolyex@yahoogroups.com, "t'byte" <trilobyte@...> wrote:

>
> Hi,
> 
> Has anyone used the Poly-800's tape load/save with a sampler?  If so, did
> it work well?  I am thinking I could simply back my patches up to the
> sampler and then load them as I see fit.  I am afraid of any A/D
> conversion possibly tampering with the signal, though.  Like when you
> record a sync track to tape and have to turn off noise cancellation on
> that track.
> 
> Any experiences?
> 
> Thanks
> tim
>

I've never had any problem playing the wav files from my computer.  It is a sampler after all if you think about it.  I don't see why it wouldn't work.