Korg Poly800/EX800 Users

I have forgotten to introduce myself to the group..

My name is Aaron and i have been doing electronic music for over 10
years. My studio now consists of:

synths: Roland Jx8p, Yamaha DX7, Korg PolySix, Korg Poly800, Ensoniq
ESQ-1, Oberheim Matrix 1000, Sequencial Prophet 600.

Computer: mac G4 dual 450, 70gb Hard Drive, 448 RAM, Cubase VST5,
VST instruments and effects (ProFive, PPG, Model E, Jx10, Battery, Attack,
Absynth)

Studio Gear: Behringer 2004 Eurorack mixer, Midiman 2x2 midi interface,
Electrix FilterFactory, Behringer Virtualizer Pro, Zoom 1204, Equitek studio
mic, Danelectro Danecho, Fabtone.

Gutiars: Yamaha accustic, Fender Jag-Stang, Fender Jazzbass.

There is something about my Poly8 that i just love and try to find a place in
most songs for it. I have this continuing desire to mod and tweak it. Maybe
cuz the casing is so cheap feeling and it just seems like it doesn't matter if i
hurt it. Anyway i have added Filt Cutoff and Q knobs to the front and just pu
the battery in it (it must be an early MK1), the power source has probs too, i
took it to a repair place but they couldn't fix it, so i just soldered a wall wart
to the main batter connection. Works fine.

Hear is my question. The knobs work fine, but they only make an audible
change to the filters from about 50%-100% opened up.. the rest of the range
does nothing. Is there something i can do to make them sweep all the way
across their range?

other question: That firmware problem is a real pain, it wipes half my presets
when i go into Cubase... Is there a work around for this or do i just need to
get a new Poly800?

Thanks in advance.

if anyone has other mods that they have performed or have ideas for some ..
let me know..!

Aaron

I had the same problem with the pots as well for these mods, If you
take a look at the pots you removed they will indicate what they were
ie 100k,5k or 1m etc. Let me know if you dont have them and i'll
check my records
You should try to match them if you can but it can take some mucking
around, i'm no expert but if you have put say a 200k pot on what was
originally a 100k pot you most likely wont get any change for a lot
of the sweep. Also muck around with both log and linnear pots, i know
volume pots are always log but on some of my mods i used linnear
because i liked the effect over log pots. Just muck around, you cant
do much harm and i tested with cheaper pots before getting some nice
ceramic ones for the final job.

brett

--- In korgpolyex@y..., "aaron jasinski" <aaron@a...> wrote:
> I have forgotten to introduce myself to the group..
>
> My name is Aaron and i have been doing electronic music for over 10
> years. My studio now consists of:
>
> synths: Roland Jx8p, Yamaha DX7, Korg PolySix, Korg Poly800,
Ensoniq
> ESQ-1, Oberheim Matrix 1000, Sequencial Prophet 600.
>
> Computer: mac G4 dual 450, 70gb Hard Drive, 448 RAM, Cubase VST5,
> VST instruments and effects (ProFive, PPG, Model E, Jx10, Battery,
Attack,
> Absynth)
>
> Studio Gear: Behringer 2004 Eurorack mixer, Midiman 2x2 midi
interface,
> Electrix FilterFactory, Behringer Virtualizer Pro, Zoom 1204,
Equitek studio
> mic, Danelectro Danecho, Fabtone.
>
> Gutiars: Yamaha accustic, Fender Jag-Stang, Fender Jazzbass.
>
> There is something about my Poly8 that i just love and try to find
a place in
> most songs for it. I have this continuing desire to mod and tweak
it. Maybe
> cuz the casing is so cheap feeling and it just seems like it
doesn't matter if i
> hurt it. Anyway i have added Filt Cutoff and Q knobs to the front
and just pu
> the battery in it (it must be an early MK1), the power source has
probs too, i
> took it to a repair place but they couldn't fix it, so i just
soldered a wall wart
> to the main batter connection. Works fine.
>
> Hear is my question. The knobs work fine, but they only make an
audible
> change to the filters from about 50%-100% opened up.. the rest of
the range
> does nothing. Is there something i can do to make them sweep all
the way
> across their range?
>
> other question: That firmware problem is a real pain, it wipes half
my presets
> when i go into Cubase... Is there a work around for this or do i
just need to
> get a new Poly800?
>
> Thanks in advance.
>
> if anyone has other mods that they have performed or have ideas for
some ..
> let me know..!

-cool thanks Bret

what other mods have you done?

-- In korgpolyex@y..., bam.bam@n... wrote:

> Aaron
>
> I had the same problem with the pots as well for these mods, If you
> take a look at the pots you removed they will indicate what they were
> ie 100k,5k or 1m etc. Let me know if you dont have them and i'll
> check my records
> You should try to match them if you can but it can take some mucking
> around, i'm no expert but if you have put say a 200k pot on what was
> originally a 100k pot you most likely wont get any change for a lot
> of the sweep. Also muck around with both log and linnear pots, i know
> volume pots are always log but on some of my mods i used linnear
> because i liked the effect over log pots. Just muck around, you cant
> do much harm and i tested with cheaper pots before getting some nice
> ceramic ones for the final job.
>
> brett
>
> --- In korgpolyex@y..., "aaron jasinski" <aaron@a...> wrote:
> > I have forgotten to introduce myself to the group..
> >
> > My name is Aaron and i have been doing electronic music for over 10
> > years. My studio now consists of:
> >
> > synths: Roland Jx8p, Yamaha DX7, Korg PolySix, Korg Poly800,
> Ensoniq
> > ESQ-1, Oberheim Matrix 1000, Sequencial Prophet 600.
> >
> > Computer: mac G4 dual 450, 70gb Hard Drive, 448 RAM, Cubase

VST5,

> > VST instruments and effects (ProFive, PPG, Model E, Jx10, Battery,
> Attack,
> > Absynth)
> >
> > Studio Gear: Behringer 2004 Eurorack mixer, Midiman 2x2 midi
> interface,
> > Electrix FilterFactory, Behringer Virtualizer Pro, Zoom 1204,
> Equitek studio
> > mic, Danelectro Danecho, Fabtone.
> >
> > Gutiars: Yamaha accustic, Fender Jag-Stang, Fender Jazzbass.
> >
> > There is something about my Poly8 that i just love and try to find
> a place in
> > most songs for it. I have this continuing desire to mod and tweak
> it. Maybe
> > cuz the casing is so cheap feeling and it just seems like it
> doesn't matter if i
> > hurt it. Anyway i have added Filt Cutoff and Q knobs to the front
> and just pu
> > the battery in it (it must be an early MK1), the power source has
> probs too, i
> > took it to a repair place but they couldn't fix it, so i just
> soldered a wall wart
> > to the main batter connection. Works fine.
> >
> > Hear is my question. The knobs work fine, but they only make an
> audible
> > change to the filters from about 50%-100% opened up.. the rest of
> the range
> > does nothing. Is there something i can do to make them sweep all
> the way
> > across their range?
> >
> > other question: That firmware problem is a real pain, it wipes half
> my presets
> > when i go into Cubase... Is there a work around for this or do i
> just need to
> > get a new Poly800?
> >
> > Thanks in advance.
> >
> > if anyone has other mods that they have performed or have ideas for
> some ..
> > let me know..!

bret, if you have that info on what the pots are, i would apriciate it. i can't
seem to find it.

-a

--- In korgpolyex@y..., "aaron jasinski" <aaron@a...> wrote:
> -cool thanks Bret
>
> what other mods have you done?
>
> -- In korgpolyex@y..., bam.bam@n... wrote:
> > Aaron
> >
> > I had the same problem with the pots as well for these mods, If you
> > take a look at the pots you removed they will indicate what they were
> > ie 100k,5k or 1m etc. Let me know if you dont have them and i'll
> > check my records
> > You should try to match them if you can but it can take some mucking
> > around, i'm no expert but if you have put say a 200k pot on what was
> > originally a 100k pot you most likely wont get any change for a lot
> > of the sweep. Also muck around with both log and linnear pots, i know
> > volume pots are always log but on some of my mods i used linnear
> > because i liked the effect over log pots. Just muck around, you cant
> > do much harm and i tested with cheaper pots before getting some nice
> > ceramic ones for the final job.
> >
> > brett
> >
> > --- In korgpolyex@y..., "aaron jasinski" <aaron@a...> wrote:
> > > I have forgotten to introduce myself to the group..
> > >
> > > My name is Aaron and i have been doing electronic music for over 10
> > > years. My studio now consists of:
> > >
> > > synths: Roland Jx8p, Yamaha DX7, Korg PolySix, Korg Poly800,
> > Ensoniq
> > > ESQ-1, Oberheim Matrix 1000, Sequencial Prophet 600.
> > >
> > > Computer: mac G4 dual 450, 70gb Hard Drive, 448 RAM, Cubase
> VST5,
> > > VST instruments and effects (ProFive, PPG, Model E, Jx10, Battery,
> > Attack,
> > > Absynth)
> > >
> > > Studio Gear: Behringer 2004 Eurorack mixer, Midiman 2x2 midi
> > interface,
> > > Electrix FilterFactory, Behringer Virtualizer Pro, Zoom 1204,
> > Equitek studio
> > > mic, Danelectro Danecho, Fabtone.
> > >
> > > Gutiars: Yamaha accustic, Fender Jag-Stang, Fender Jazzbass.
> > >
> > > There is something about my Poly8 that i just love and try to find
> > a place in
> > > most songs for it. I have this continuing desire to mod and tweak
> > it. Maybe
> > > cuz the casing is so cheap feeling and it just seems like it
> > doesn't matter if i
> > > hurt it. Anyway i have added Filt Cutoff and Q knobs to the front
> > and just pu
> > > the battery in it (it must be an early MK1), the power source has
> > probs too, i
> > > took it to a repair place but they couldn't fix it, so i just
> > soldered a wall wart
> > > to the main batter connection. Works fine.
> > >
> > > Hear is my question. The knobs work fine, but they only make an
> > audible
> > > change to the filters from about 50%-100% opened up.. the rest of
> > the range
> > > does nothing. Is there something i can do to make them sweep all
> > the way
> > > across their range?
> > >
> > > other question: That firmware problem is a real pain, it wipes half
> > my presets
> > > when i go into Cubase... Is there a work around for this or do i
> > just need to
> > > get a new Poly800?
> > >
> > > Thanks in advance.
> > >
> > > if anyone has other mods that they have performed or have ideas for
> > some ..
> > > let me know..!