Synth-DIY Yahoo! Groups Archives

MIDI Dump

2009-05-05 by alpoly800

Please excuse my absolute ignorance.......

Im using a program called Sysex Librarian and want to save the patches on my Poly800 MK2

Ive loaded the MIDI dump file from the files section in this forum and the program says it has ran it and then i see nothing...

should nt there be a sysex file with patches saved.....

Please excuse my stupidity but i know im doing something wrong....

your talking to total newbie for 80s technology!

Once I know Ill never ask again...
and I solved my latency issue

thank you very much

xxa

Re: MIDI Dump

2009-05-05 by alpoly800

Ok so managed to dump a file into logic 8, I think it looks ok,

Then changed the sounds -> great

now would like to change back to the original sounds i had :~ hmmmm

Re: MIDI Dump

2009-05-05 by alpoly800

The little midi file in logic has a small "x" near the start of it on the arrange page.....

Is that X for good or X for bad?

Thanks again

Its a slow process but Ill get there!

Re: [korgpolyex] MIDI Dump

2009-05-07 by Frequency Spectrum

Ok the midi dump file tells it to go into dump mode so then you have to have to have your software ready

almost instantly to receive from the poly. Its nearly impossible.

So what you do is load the midi file (the dump request) in say cubase or logic and then set the librarian in record mode. Play the midi dump in your sequencer and have the sysex librarian in record mode and voila you'll see a file appear in the sysex librarian appear.

if this doesnt help hit me up (freqspec@...)

i'll see if i can go through it step by step as im in a rush right now

Show quoted textHide quoted text

On Tue, May 5, 2009 at 11:02 PM, alpoly800 <alpoly800@...> wrote:

Please excuse my absolute ignorance.......

Im using a program called Sysex Librarian and want to save the patches on my Poly800 MK2

Ive loaded the MIDI dump file from the files section in this forum and the program says it has ran it and then i see nothing...

should nt there be a sysex file with patches saved.....

Please excuse my stupidity but i know im doing something wrong....

your talking to total newbie for 80s technology!

Once I know Ill never ask again...
and I solved my latency issue

thank you very much

xxa