Poly-800 Mk I, Midi receive channel issue?
2009-04-23 by serotonic_sound
Hello again y'all...Quick Question:
I just tried putting my Poly-800 on a single port with 4 other synths using the typical: card out-->in-->through-in->through-in-->through... configuration.
But it seemd like the Poly-800 would only receive in omni mode no matter what I set the receive channel to.
Then I tried plugging one synth's out into the poly's in, same issue. It sure seems like something isn't right with the Poly-800. It works fine otherwise.
Was I just really tired last night, or, can anybody suggest what was happening?
Thanks,
-Tim
I just tried putting my Poly-800 on a single port with 4 other synths using the typical: card out-->in-->through-in->through-in-->through... configuration.
But it seemd like the Poly-800 would only receive in omni mode no matter what I set the receive channel to.
Then I tried plugging one synth's out into the poly's in, same issue. It sure seems like something isn't right with the Poly-800. It works fine otherwise.
Was I just really tired last night, or, can anybody suggest what was happening?
Thanks,
-Tim